Amazfish

Rating: 
4.68889
Your rating: None Average: 4.7 (45 votes)

Donations: https://paypal.me/piggz

Companion application for the Huami Amazfit Bip and Cor

***PLEASE READ BEFORE UPDATING TO 0.9.0***

Version 0.9.0 requires sailfish version 3.0.3.8 or above due to changes in the base sailfish image

Powered by KEXI

As of version 0.5.1, actiivity data is retrieved into an sqlite database.  Becuase I think it is important to allow individuals to be in control of their own data, and that they should have the ability to analyse it themsleves, I have chosen to store data in a KEXI compatible database.  This will allow you to copy the database from the phone, and open it up inside KEXI on Linux/Windows/Mac and perform queries and reports on it.  This added ability means i link to a couple of KDE libraries, which should be installed automatically.

Firmware Download - READ FIRST - I am not liable if you brick your watch ;)

Read this for info about which files to flash https://github.com/Freeyourgadget/Gadgetbridge/wiki/Amazfit-Bip-Firmware...

App has been tested using an amazfit bip, downloading the latest (0.1.1.45) official firmware.

The firmware is split into multiple files on these devices.  With the official MiFit app, all are downloaded at once, and everything works fine.  With this app, you have to send each file individually.  The firmwares are available by extracting the MiFit apk, and looking in the assets/ folder for files named Mili_chaohu.*.  When you select a file, its type and version will be determined, and you will be prevented from sending invalid files.

The firmware (.fw) requires a matching resource (.res).  Send the firmware first, the app will send a reboot command at the end of the transfer, and the watch will boot up into a mode where it needs the matching resource sent.  Just wait for the app to connect again, then send the resource. 

The following types of file exist:

firmware, resource, a-gps data, fonts

Pairing Issues

Pairing works for myself, sometimes I have to try twice.  If pairing doesnt work at all, then try:

  • keep the app open, and pair again in the BT settings page of sailfish
  • in the sailfish BT settings page, delete all entries and try again
  • turn off/on BT on the phone
  • factory reset the watch

Check if after all this, pairing works from the sailfish BT settings page.  It should pair and connect just fine from there.  f that doesnt work, my app wont either.

Not all features currently implemented

***May not work on all devices***

Uses Bluetooth Low Energy to communicate with the watch, this is known to be problematic on some devices.  it is known to work on the Xiaomi Mido.  Probably also works on the FP2.  Official devices unknown.

Implemented

  • Pairingfrom
  • Notifications
  • Calls
  • Some settings
  • Retrieving activities
  • Heartrate Chart
  • Alarms
  • Watchface download
  • Firmware upload
  • Activity Sync

Todo

  • More Settings
  • Support other devices (maybe eg MiBand2, as it is similar)

The Cor is also claimed to be working, but as i dont have that device, i cant test it.

Tip:
On your device, create a symlink in /home/nemo to /home/nemo/.local/share/harbour-amazfish
This way, you can easilty copy the database off the phone using MTP.

Source: https://github.com/piggz/harbour-amazfish

Credits to:

  • The rockpool devs, as i borrowed the call handling code handling code from them
  • The gadgetbridge devs, which gave me a lot of hints and inspiration from theire device code.
Screenshots: 
Application versions: 
AttachmentSizeDate
File harbour-amazfish-0.1-1.armv7hl.rpm112.29 KB17/04/2018 - 23:12
File harbour-amazfish-0.2-1.armv7hl.rpm119.54 KB28/04/2018 - 00:35
File harbour-amazfish-0.3-1.armv7hl.rpm131.01 KB07/05/2018 - 23:54
File harbour-amazfish-0.4-1.armv7hl.rpm137.54 KB18/05/2018 - 23:22
File harbour-amazfish-0.4.1-1.armv7hl.rpm137.63 KB20/05/2018 - 00:15
File harbour-amazfish-0.4.5-1.armv7hl.rpm148.71 KB22/05/2018 - 22:02
File harbour-amazfish-0.4.6-1.armv7hl.rpm149.08 KB22/05/2018 - 22:55
File harbour-amazfish-0.4.7-1.armv7hl.rpm149.42 KB24/05/2018 - 00:35
File harbour-amazfish-0.5.1-1.armv7hl.rpm158.56 KB30/05/2018 - 00:22
File harbour-amazfish-0.5.5-1.armv7hl.rpm164.27 KB02/06/2018 - 22:11
File harbour-amazfish-0.5.8-1.armv7hl.rpm168.1 KB04/06/2018 - 21:07
File harbour-amazfish-0.5.9-1.armv7hl.rpm170.27 KB05/06/2018 - 22:24
File harbour-amazfish-0.6.0-1.armv7hl.rpm171.68 KB06/06/2018 - 00:17
File harbour-amazfish-0.6.5-1.armv7hl.rpm179.96 KB23/06/2018 - 11:28
File harbour-amazfish-0.6.7-1.armv7hl.rpm185.47 KB26/06/2018 - 21:55
File harbour-amazfish-0.6.8-1.armv7hl.rpm186.04 KB28/06/2018 - 21:19
File harbour-amazfish-0.7.0-1.armv7hl.rpm238.07 KB15/07/2018 - 12:13
File harbour-amazfish-0.7.1-1.armv7hl.rpm237.48 KB19/07/2018 - 16:51
File harbour-amazfish-0.7.3-1.armv7hl.rpm239.17 KB23/07/2018 - 23:19
File harbour-amazfish-0.7.5-1.armv7hl.rpm673.84 KB26/08/2018 - 11:02
File harbour-amazfish-0.8.0-1.armv7hl.rpm673.94 KB25/11/2018 - 16:33
File harbour-amazfish-0.8.1-1.armv7hl.rpm674.27 KB29/11/2018 - 00:32
File harbour-amazfish-0.8.2-1.armv7hl.rpm674.21 KB01/12/2018 - 16:29
File harbour-amazfish-0.8.5-1.armv7hl.rpm679.46 KB12/01/2019 - 18:02
File harbour-amazfish-0.8.7-1.armv7hl.rpm681.18 KB23/01/2019 - 01:38
File harbour-amazfish-0.8.8-1.armv7hl.rpm681.32 KB04/04/2019 - 20:58
File harbour-amazfish-0.8.9-1.armv7hl.rpm682.44 KB05/04/2019 - 01:11
File harbour-amazfish-0.9.0-1.armv7hl.rpm703.9 KB18/05/2019 - 00:30
File harbour-amazfish-0.9.1-1.armv7hl.rpm702.06 KB21/05/2019 - 22:37
File harbour-amazfish-0.9.2-1.armv7hl.rpm703.2 KB12/06/2019 - 23:28
File harbour-amazfish-1.0.0-1.armv7hl.rpm703.32 KB05/01/2020 - 17:44
Changelog: 

1.0.0

  • Added support for flashing newer firmwares
  • Added disconnect notification option
  • Fix buffered notifications when the watch is not connected (they never worked)
  • Added workaround for data not syncing when in DST
  • Added low battery notification

0.9.2
Stop notification when call answered
Fix sending weather on interval
Add more languages for watch (only works if supported by FW)

0.9.1
Fixed crash for new users
Weather UI fixes
Whitelisted some more firmware
Translation updates
Bugfixes for daemon/ui split

0.9.0
***ONLY FOR SAILFISHOS >= 3.0.3***
Daemon/UI split
Reworked some pages to streamline them

0.8.9
Add buffer for 10 notifications when watch disconnected

0.8.8
Added deep sleep value to page
Save GPX files in data location not cache location
May install on SFOS 3.0.3 when available

0.8.7
New UI layout
Sleep statistics

0.8.5
Added step summary chart showing steps over previous 20 days from the selected day
Added auto-sync of activity data which occurs each hour

0.8.2
Fixed applying settings from the UI

0.8.1
Hopefully fixed crash introduced in 0.8.0

0.8.0
Major code restructure to better allow support for other devices (devs needed!)
Whitelist new Bip frmwares
Hopefully fixed GPS issue with new firmwares

 

0.7.5
Implemented sending weather
Fixed app displaying correct status when watch disconnects
Use correct icon for depecher
Fix layout of HR button

 

0.7.3
Updated translations
Fixed user profile settings page not opening

Comments

erdzas's picture

Hi @piggz.

First, nice app, it work well for cor and miband 2.

Is theire any workaround to pair with GTS, for now?

Or must we wait the next realase?

Now when I try to pair, the app stay at "connecting to watch" stage

piggz's picture

Wait fo rnext release :)

jpn9s's picture

Good morning. I have Amazfit Cor plus Amazfish together XA2 SFOS 3.2.1.20. Everything works perfect, but the calendar alarms in the phone are not shown in my Amazfit Cor. Calls and messages are shown. Also putting on Android support is shown in my Cor. What do I have to do that also calendar alarms are  shown, or  are they not allowed yet? Thank you for your Amazfish and for your help.

alex000090's picture

Dear piggz,
There is the problem with newest version of the program or my firmware. I can't switch on/off alarms from the clock. So, if in the program alarm is on and I switch off it from the clock it again switch on itself afrer some time.

Georgiy's picture

I can not understand the reason, then connect then not, firmware 1.1.6.36

Georgiy's picture

I will test,I have no choice, I left Android

piggz's picture

File an issue on github containing logs from journal, eg, as root, journalctl | grep amazfish

Georgiy's picture

Updated the watch to version 1.1.6.35 today, via Android on another phone, stopped connecting at all.

alex000090's picture

I've update to 1.1.6.36 from android. There is no problem with connection to amazfish. But first of all I remove my watch from mi fit with rebooting the watch.

piggz's picture

You might have made it incompatible (for the moment) ... some newer devices use a server based pairing mode, and there is some comment that older devices with newer fw also use this pairing method.  I am writing such support for the amazfit GTS, but not tried on a Bip yet on the latest FW.

Georgiy's picture

Sorry for bad english.

Georgiy's picture

Not working.

Georgiy's picture

All right,we need an automatic reconnect.

piggz's picture

it does, it checks once a minute and has worked fine for quite some time.  What is not working?

ronny_b's picture

Dear Adam,

since the last update, the alarm clocks can be switched on and off on the BIP, but the app will overwrite them again. Has anything been changed here?

Ronny

piggz's picture

I dont _think_ I changed anything. It should only overwrite when you click the save button on the alarms page.  There doesnt seem to be a way to read the alarms back from the watch.  I will double check that alarms arnt being written at other times.

D_R's picture

Dear Adam,
It's working now. You made my day! Thank you very much for your personal assistance!!!

D_R's picture

Thank you for your response.
I have 5mins too for HRM intervall. When I'm running journalctl as user memo I'm getting: No journal files found. As root ther is something loged. But my graphs are still empty.

piggz's picture

can you supply the logs you get as root

D_R's picture

Here is the log:

[root@Sailfish nemo]# journalctl -f |grep amazfish
Jan 13 22:10:38 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - DeviceInterface::onRefreshTimer
Jan 13 22:10:57 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - AbstractDevice::reconnectionTimer
Jan 13 22:10:59 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000007-0000-3512-2118-0009af100700" "0c76120000610c000036000000"
Jan 13 22:10:59 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...Got realtime steps: 13
Jan 13 22:10:59 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - slot_informationChanged AbstractDevice::Info(INFO_STEPS) "4726"
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - last sync was  -3600000 QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00)
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - last activity sync was QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00)
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - UTC offset it  3600
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - converted date QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00) to "\xB2\x07\x01\x01\x00\x00\x00\x04"
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00000005-0000-3512-2118-0009af100700"
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00000004-0000-3512-2118-0009af100700"
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000004-0000-3512-2118-0009af100700" : "0101b207010100000004"
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000004-0000-3512-2118-0009af100700" : "02"
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 2
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 2
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000004-0000-3512-2118-0009af100700" "100104"
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...got metadata
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Unexpected activity metadata:  "\x10\x01\x04"
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000004-0000-3512-2118-0009af100700" "100204"
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...got metadata
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - No data left to fetch
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 0
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:11:10 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 0
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - last sync was  -3600000 QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00)
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - last activity sync was QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00)
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - UTC offset it  3600
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - converted date QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00) to "\xB2\x07\x01\x01\x00\x00\x00\x04"
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00000005-0000-3512-2118-0009af100700"
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00000004-0000-3512-2118-0009af100700"
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000004-0000-3512-2118-0009af100700" : "0101b207010100000004"
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000004-0000-3512-2118-0009af100700" : "02"
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 2
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 2
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000004-0000-3512-2118-0009af100700" "100104"
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...got metadata
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Unexpected activity metadata:  "\x10\x01\x04"
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000004-0000-3512-2118-0009af100700" "100204"
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...got metadata
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - No data left to fetch
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 0
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:11:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 0
Jan 13 22:11:38 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - DeviceInterface::onRefreshTimer
Jan 13 22:11:41 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00002a37-0000-1000-8000-00805f9b34fb"
Jan 13 22:11:41 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00002a39-0000-1000-8000-00805f9b34fb" : "150100"
Jan 13 22:11:41 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00002a39-0000-1000-8000-00805f9b34fb" : "150201"
Jan 13 22:11:55 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - HRM Changed: "00002a37-0000-1000-8000-00805f9b34fb" "\x00""D"
Jan 13 22:11:55 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ..got HR measurement
Jan 13 22:11:55 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - slot_informationChanged AbstractDevice::Info(INFO_HEARTRATE) "68"
Jan 13 22:11:57 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - AbstractDevice::reconnectionTimer
Jan 13 22:11:57 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - HRM Changed: "00002a37-0000-1000-8000-00805f9b34fb" "\x00""C"
Jan 13 22:11:57 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ..got HR measurement
Jan 13 22:11:57 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - slot_informationChanged AbstractDevice::Info(INFO_HEARTRATE) "67"
Jan 13 22:11:58 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000007-0000-3512-2118-0009af100700" "0c76120000610c000036000000"
Jan 13 22:11:58 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...Got realtime steps: 13
Jan 13 22:11:58 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - slot_informationChanged AbstractDevice::Info(INFO_STEPS) "4726"
Jan 13 22:12:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 0 0
Jan 13 22:12:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Setting profile "Denis" 65917399 0 175 82 QDate("1973-10-11")
Jan 13 22:12:27 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000008-0000-3512-2118-0009af100700" : "4f0000b5070a0b00af005200d7d1ed03"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 1 1
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000008-0000-3512-2118-0009af100700" : "1000001027000000"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 2 2
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000003-0000-3512-2118-0009af100700" : "06060001"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 5 5
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000003-0000-3512-2118-0009af100700" : "06050000"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 3 3
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Setting HRM monitoring to 5
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00002a39-0000-1000-8000-00805f9b34fb"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00002a39-0000-1000-8000-00805f9b34fb" : "1405"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Stopping notify for  "00002a39-0000-1000-8000-00805f9b34fb"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000003-0000-3512-2118-0009af100700" "1006060001"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000003-0000-3512-2118-0009af100700" "1006050001"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 4 4
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Setting HRM sleept support to true
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00002a39-0000-1000-8000-00805f9b34fb"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00002a39-0000-1000-8000-00805f9b34fb" : "150001"
Jan 13 22:12:28 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Stopping notify for  "00002a39-0000-1000-8000-00805f9b34fb"
Jan 13 22:12:38 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - DeviceInterface::onRefreshTimer
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 0 0
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Setting profile "Denis" 65917399 0 175 82 QDate("1973-10-11")
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000008-0000-3512-2118-0009af100700" : "4f0000b5070a0b00af005200d7d1ed03"
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 1 1
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000008-0000-3512-2118-0009af100700" : "1000001027000000"
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 2 2
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000003-0000-3512-2118-0009af100700" : "06060001"
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 5 5
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000003-0000-3512-2118-0009af100700" : "06050000"
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 3 3
Jan 13 22:12:46 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Setting HRM monitoring to 5
Jan 13 22:12:47 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00002a39-0000-1000-8000-00805f9b34fb"
Jan 13 22:12:47 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00002a39-0000-1000-8000-00805f9b34fb" : "1405"
Jan 13 22:12:47 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Stopping notify for  "00002a39-0000-1000-8000-00805f9b34fb"
Jan 13 22:12:47 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000003-0000-3512-2118-0009af100700" "1006060001"
Jan 13 22:12:47 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000003-0000-3512-2118-0009af100700" "1006050001"
Jan 13 22:12:47 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Apply setting: 4 4
Jan 13 22:12:47 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Setting HRM sleept support to true
Jan 13 22:12:47 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00002a39-0000-1000-8000-00805f9b34fb"
Jan 13 22:12:47 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00002a39-0000-1000-8000-00805f9b34fb" : "150001"
Jan 13 22:12:47 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Stopping notify for  "00002a39-0000-1000-8000-00805f9b34fb"
Jan 13 22:12:57 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - AbstractDevice::reconnectionTimer
Jan 13 22:12:57 Sailfish i[12023]: [D] unknown:0 - QUrl("https://nominatim.openstreetmap.org/reverse.php?format=json&zoom=6&lat=4...")
Jan 13 22:12:57 Sailfish i[12023]: [D] unknown:0 - QUrl("https://nominatim.openstreetmap.org/reverse.php?format=json&zoom=6&lat=4...")
Jan 13 22:12:58 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000007-0000-3512-2118-0009af100700" "0c76120000610c000036000000"
Jan 13 22:12:58 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...Got realtime steps: 13
Jan 13 22:12:58 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - slot_informationChanged AbstractDevice::Info(INFO_STEPS) "4726"
Jan 13 22:12:59 Sailfish i[12023]: [D] unknown:0 - QUrl("https://nominatim.openstreetmap.org/reverse.php?format=json&zoom=6&lat=5...")
Jan 13 22:12:59 Sailfish i[12023]: [D] unknown:0 - QUrl("https://nominatim.openstreetmap.org/reverse.php?format=json&zoom=6&lat=5...")
Jan 13 22:12:59 Sailfish i[12023]: [D] unknown:0 - QUrl("https://nominatim.openstreetmap.org/reverse.php?format=json&zoom=6&lat=5...")
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - last sync was  -3600000 QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00)
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - last activity sync was QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00)
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - UTC offset it  3600
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - converted date QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00) to "\xB2\x07\x01\x01\x00\x00\x00\x04"
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00000005-0000-3512-2118-0009af100700"
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00000004-0000-3512-2118-0009af100700"
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000004-0000-3512-2118-0009af100700" : "0101b207010100000004"
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000004-0000-3512-2118-0009af100700" : "02"
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 2
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 2
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000004-0000-3512-2118-0009af100700" "100104"
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...got metadata
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Unexpected activity metadata:  "\x10\x01\x04"
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000004-0000-3512-2118-0009af100700" "100204"
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...got metadata
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - No data left to fetch
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 0
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:19 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 0
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - last sync was  -3600000 QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00)
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - last activity sync was QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00)
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - UTC offset it  3600
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - converted date QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00) to "\xB2\x07\x01\x01\x00\x00\x00\x04"
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00000005-0000-3512-2118-0009af100700"
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00000004-0000-3512-2118-0009af100700"
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000004-0000-3512-2118-0009af100700" : "0101b207010100000004"
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000004-0000-3512-2118-0009af100700" : "02"
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 2
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 2
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000004-0000-3512-2118-0009af100700" "100104"
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...got metadata
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Unexpected activity metadata:  "\x10\x01\x04"
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000004-0000-3512-2118-0009af100700" "100204"
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...got metadata
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - No data left to fetch
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 0
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:26 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 0
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - last sync was  -3600000 QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00)
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - last activity sync was QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00)
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - UTC offset it  3600
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - converted date QDateTime(1970-01-01 00:00:00.000 UTC+01:00 Qt::TimeSpec(TimeZone) UTC+01:00) to "\xB2\x07\x01\x01\x00\x00\x00\x04"
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00000005-0000-3512-2118-0009af100700"
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Starting notify for  "00000004-0000-3512-2118-0009af100700"
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000004-0000-3512-2118-0009af100700" : "0101b207010100000004"
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Writing to  "00000004-0000-3512-2118-0009af100700" : "02"
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 2
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 2
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000004-0000-3512-2118-0009af100700" "100104"
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...got metadata
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - Unexpected activity metadata:  "\x10\x01\x04"
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - MiBand Changed: "00000004-0000-3512-2118-0009af100700" "100204"
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - ...got metadata
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - No data left to fetch
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 0
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is firmware operation running: 0
Jan 13 22:13:31 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - is miband operation running: 0
Jan 13 22:13:38 Sailfish harbour-amazfishd[14225]: [D] unknown:0 - DeviceInterface::onRefreshTimer

 

piggz's picture

Ok, somehow your settings are messed up and its trying to sync an invalid date.  try:

dconf reset /uk/co/piggz/amazfish/device/lastactivitysyncmillis

D_R's picture

No unfortunately not. The graphs are empty and when I try to download data I get always 'No data to transfer'

piggz's picture

under settings, user, have you enabled 'all day hrm'? my interval is 5.  also, the real logs i need are fron the journal, preferably after a stop/start of the service . use joirnalctl for this

D_R's picture

Deleting habour-amazfish directory copletely and reinstalling Amazfish recreated the database.

My Telegram problem ist still pending thats why the logfiles here:

<code>

[nemo@Sailfish harbour-amazfish]$ /usr/bin/harbour-amazfish
-bash: /usr/bin/harbour-amazfish: No such file or directory
[nemo@Sailfish harbour-amazfish]$ /usr/bin/harbour-amazfish
harbour-amazfish-ui  harbour-amazfishd    
[nemo@Sailfish harbour-amazfish]$ /usr/bin/harbour-amazfish-ui
[D] unknown:0 - BluezAdapter::BluezAdapter
[D] unknown:0 - Connecting to daemon signals
[D] unknown:0 - DRIVERS:  ("org.kde.kdb.sqlite")
[D] unknown:0 - Database is:  "/home/nemo/.local/share/harbour-amazfish/harbour-amazfish/amazfish.kexi"
[D] unknown:0 - KDbConnection object created.
[D] unknown:0 - KDbConnection::connect() OK.
[D] unknown:0 - Using Wayland-EGL
[D] unknown:0 - "SELECT date(timestamp_dt), sum(steps) FROM mi_band_activity WHERE date(timestamp_dt) >= date('2020-01-12T00:00:00','-10 day') AND timestamp_dt <= '2020-01-12T23:59:59' GROUP BY date(timestamp_dt) ORDER BY timestamp_dt ASC"
[D] expression for onInformationChanged:208 - Information changed 8 14146
[W] unknown:518 - file:///usr/lib/qt5/qml/Sailfish/Silica/private/PulleyMenuBase.qml:518:29: Unable to assign [undefined] to float
[D] unknown:0 - "SELECT timestamp_dt, raw_kind, raw_intensity FROM mi_band_activity WHERE timestamp_dt >= date('2020-01-12T11:59:00','-10 day') AND timestamp_dt <= '2020-01-12T12:01:00' ORDER BY timestamp_dt ASC"
[W] unknown:518 - file:///usr/lib/qt5/qml/Sailfish/Silica/private/PulleyMenuBase.qml:518:29: Unable to assign [undefined] to float
[D] unknown:0 - "SELECT date(timestamp_dt), sum(steps) FROM mi_band_activity WHERE date(timestamp_dt) >= date('2020-01-12T00:00:00','-10 day') AND timestamp_dt <= '2020-01-12T23:59:59' GROUP BY date(timestamp_dt) ORDER BY timestamp_dt ASC"
[W] unknown:447 - file:///usr/lib/qt5/qml/Sailfish/Silica/private/PulleyMenuBase.qml:447:13: QML State: Binding loop detected for property "when"
[W] unknown:447 - file:///usr/lib/qt5/qml/Sailfish/Silica/private/PulleyMenuBase.qml:447:13: QML State: Binding loop detected for property "when"
[D] expression for onInformationChanged:208 - Information changed 8 14146
[D] unknown:0 - "SELECT timestamp_dt, heartrate FROM mi_band_activity WHERE heartrate < 255 AND timestamp_dt >= '2020-01-12T00:00:00' AND timestamp_dt <= '2020-01-12T23:59:59' ORDER BY timestamp_dt ASC"
[D] unknown:0 - "SELECT timestamp_dt, steps FROM mi_band_activity WHERE timestamp_dt >= '2020-01-12T00:00:00' AND timestamp_dt <= '2020-01-12T23:59:59' ORDER BY timestamp_dt ASC"
[D] unknown:0 - "SELECT timestamp_dt, ((raw_intensity / 255.0) * 100) FROM mi_band_activity WHERE timestamp_dt >= '2020-01-12T00:00:00' AND timestamp_dt <= '2020-01-12T23:59:59' ORDER BY timestamp_dt ASC"
[W] unknown:518 - file:///usr/lib/qt5/qml/Sailfish/Silica/private/PulleyMenuBase.qml:518:29: Unable to assign [undefined] to float
[W] unknown:518 - file:///usr/lib/qt5/qml/Sailfish/Silica/private/PulleyMenuBase.qml:518:29: Unable to assign [undefined] to float
[D] unknown:0 - "SELECT timestamp_dt, heartrate FROM mi_band_activity WHERE heartrate < 255 AND timestamp_dt >= '2020-01-12T00:00:00' AND timestamp_dt <= '2020-01-12T23:59:59' ORDER BY timestamp_dt ASC"
[D] unknown:0 - "SELECT timestamp_dt, steps FROM mi_band_activity WHERE timestamp_dt >= '2020-01-12T00:00:00' AND timestamp_dt <= '2020-01-12T23:59:59' ORDER BY timestamp_dt ASC"
[D] unknown:0 - "SELECT timestamp_dt, ((raw_intensity / 255.0) * 100) FROM mi_band_activity WHERE timestamp_dt >= '2020-01-12T00:00:00' AND timestamp_dt <= '2020-01-12T23:59:59' ORDER BY timestamp_dt ASC"

</code>

 

piggz's picture

Does it work now?

carmenfdezb's picture

Hi @piggz!! Thanks for your excellent app!! It works perfect with my amazfit bip, but for some reason, Amazfish doesn't show info about steps in the first page:

https://ibb.co/YbSVJ6R

What am I doing wrong?

piggz's picture

Nothing, its just I moved the steps info to the page on the right.

carmenfdezb's picture

Ok, thanks for your answer!

D_R's picture

I have some trouble with telegram:I'm blocked now...
But I investigated the problem: I can't find any database. Uninstalling and reinstallin amazfish doesn't help. Is there any script to recreate the database?

vige's picture

The new disconnect notification is awesome - I would have forgotten my phone already twice today without it :-D

Pages