harbour-storeman-0.1.8-1.armv7hl.rpm | 302.35 KB | 04/01/2020 - 09:31 |
harbour-storeman-0.1.8-1.i486.rpm | 323.64 KB | 04/01/2020 - 09:31 |
harbour-storeman-0.1.9-1.armv7hl.rpm | 303.47 KB | 18/06/2020 - 00:55 |
harbour-storeman-0.1.9-1.i486.rpm | 338.95 KB | 18/06/2020 - 00:55 |
harbour-storeman-0.1.10-1.armv7hl.rpm | 305.14 KB | 30/06/2020 - 00:09 |
harbour-storeman-0.1.10-1.i486.rpm | 341.5 KB | 30/06/2020 - 00:09 |
harbour-storeman-0.1.11-1.armv7hl.rpm | 306.8 KB | 19/08/2020 - 22:09 |
harbour-storeman-0.1.11-1.i486.rpm | 343.16 KB | 19/08/2020 - 22:09 |
harbour-storeman-0.1.12-2.armv7hl.rpm | 309.2 KB | 22/08/2020 - 15:52 |
harbour-storeman-0.1.12-2.i486.rpm | 345.78 KB | 22/08/2020 - 15:52 |
harbour-storeman-0.2.0-1.armv7hl.rpm | 304.74 KB | 22/09/2020 - 23:56 |
harbour-storeman-0.2.0-1.i486.rpm | 340.12 KB | 22/09/2020 - 23:56 |
harbour-storeman-0.2.1-1.armv7hl.rpm | 307.81 KB | 24/09/2020 - 10:43 |
harbour-storeman-0.2.1-1.i486.rpm | 343.44 KB | 24/09/2020 - 10:43 |
harbour-storeman-0.2.3-1.sfos3_.2.armv7hl.rpm | 309.91 KB | 29/11/2020 - 14:07 |
harbour-storeman-0.2.3-1.sfos3_.2.i486.rpm | 331.73 KB | 29/11/2020 - 14:07 |
harbour-storeman-0.2.3-1.sfos3_.3.armv7hl.rpm | 312.4 KB | 29/11/2020 - 14:07 |
harbour-storeman-0.2.3-1.sfos3_.3.i486.rpm | 347.94 KB | 29/11/2020 - 14:07 |
harbour-storeman-0.2.3-1.sfos3_.4.armv7hl.rpm | 312.5 KB | 29/11/2020 - 14:07 |
harbour-storeman-0.2.3-1.sfos3_.4.i486.rpm | 347.36 KB | 29/11/2020 - 14:07 |
Comments
mugshot
Fri, 2018/12/14 - 20:55
Permalink
I've noticed this too. Edit: The updating apps bug. Commenting works now after latest release.
Historyscholar
Sat, 2018/12/01 - 05:49
Permalink
Very Good!Thanks!
Mick
Sat, 2018/12/01 - 02:57
Permalink
Network Error notification keeps popping up when the app is started on SailfishX 3.0.0.8.
Any ideas?
Thanks.
scanner
Thu, 2018/11/29 - 02:13
Permalink
the app preview pictures can't be enlarged on my intex since version 0.0.28
osetr
Sun, 2018/12/16 - 18:28
Permalink
Could they have been enlarged before? I use standard Silica components for apps' pictures and rely on its behaviour.
Marold
Mon, 2018/11/26 - 15:00
Permalink
Hello after updating to sfos3 I have problem installing/updating any app. I always got "file './armv7hl/droid-hal-version-f5121-0.2.1-1.2.20.armv7hl.rpm' not found on medium 'https//store-repository.jolla.com/releases/3.0.0.8/jolla-hw/adaptation-qualcomm-f5121/armv7hl/?credentials=store' " Whats going on any ideas will be much appreciated. Thanks for Your time and hard work, best regards
Edit: Nevermind pkcon refresh helped
Kelmi
Thu, 2018/11/22 - 04:23
Permalink
Thank you osetr again for updating storeman! Comment bug is gone, fantastic! ;)
Markkyboy
Tue, 2018/11/20 - 15:03
Permalink
Hi osetr, for some reason, I do not get offered 'Install' from top pulley menu, this is rather frutrating while trying to upload/check my own apps - all I get offered on the pulley menu is Reload and Refresh cache, these options do not change. I have uninstalled Storeman and reinstalled, but it makes no difference; any ideas?, thanks.
osetr
Tue, 2018/11/20 - 15:14
Permalink
It's strange. I've just checked some of your packages and everything seems to be ok. Have you tried to remove and re-add your repo?
Markkyboy
Tue, 2018/11/20 - 16:12
Permalink
I don't know what I did, but now it is all working again. A glitch in the matrix I guess ;)
Thanks for your time osetr :)
Markkyboy
Tue, 2018/11/20 - 15:45
Permalink
Oddly, I am offered the option to 'Install' from other repos, just not my own, ...the plot thickens!
osetr
Tue, 2018/11/20 - 15:48
Permalink
Can you try to install your package through the Terminal app?
Markkyboy
Tue, 2018/11/20 - 15:57
Permalink
Doing that right now :)
Here's the output:
[nemo@Sailfish ~]$ devel-su pkcon refresh
Password:
Refreshing cache
Refreshing software list
Finished
[nemo@Sailfish ~]$ devel-su pkcon install shortcut-screenshots
Password:
Resolving [ ] (0%) Package not found: shortcut-screenshots
Command failed: This tool could not find any available package: No packages were found
[nemo@Sailfish ~]$
Markkyboy
Tue, 2018/11/20 - 15:23
Permalink
Yes, I've just tried removing my repo and adding again, it took a long time to add and I still only have Reload and Refresh cache from top pulley menu. It must be a problem with my device, as I can see that one user has successfully download and left feedback on a new app. Strange indeed.
No amount of removal, restarting, refreshing, turnning device off/on, reset connection.....I always try everything I can before making contact with devs, unless I am lost.........this time, I am lost.
Historyscholar
Mon, 2018/11/19 - 05:20
Permalink
Storeman have not Chinese currently. Please add Chinese.Thanks.
osetr
Mon, 2018/11/19 - 13:12
Permalink
Storeman currently has zh_CN (Chinese, China) locale. All available locales are listed at Transifex.
hwansing
Fri, 2018/11/16 - 16:26
Permalink
Hi. storeman seems rather unusable here on 3.0.0.8. Trying to install several apps like Laufhelden or Pure Maps results in a fail due to "Aborted by user". pkcon refresh did not help. Downloading the files directly from openrepos and installing them with file manager works. So this looks like some sort of "download problem". However, irritating error message. Is there some log file to look into?
osetr
Sat, 2018/11/17 - 22:43
Permalink
Hi,
Here is the debug version. But since Storeman is launched through the invoker it's a bit complicated to obtain its logs. To do it note the time of launching Storeman and after closing it type in Terminal
where the "--since" value is the time you've noted. Then send me please the resulting "harbour-storeman.log" file.
Skillmon
Wed, 2018/11/14 - 14:44
Permalink
Remove from the pulley doesn't work if an update is available.
rob_k
Sun, 2018/11/04 - 15:16
Permalink
Hi osetr,
Thank you for creating Storeman, works so much faster than Warehouse did. Pity I have to renew my login so frequently, but I guess there are security reasons for this.
I noticed a few times that writing a comment did not result in actually placing a comment in openrepos. I just tested (you probably saw that), and it works now ;)
Giving a rating from the app would be a nice feature. Tapping the star results in a bookmark now.
Cheers, Rob
osetr
Sun, 2018/11/04 - 16:44
Permalink
Hi,
Dissapearing comments is a known issue.
You can rate apps by tapping the "Thumb up" icon.
Markkyboy
Sun, 2018/11/04 - 11:53
Permalink
Hola osetr,
'An error occured' when trying to update storeman 'armv7hl/geoclue-provider-here-0.0.17-1.2.4.jolla.armv7hl.rpm not found......'
What has this got to do with maps?, I don't have any mapping system on the device, any ideas?, thanks
osetr
Sun, 2018/11/04 - 12:27
Permalink
Hi, Look at my previous reply to PawelSpoon
Markkyboy
Sun, 2018/11/04 - 13:18
Permalink
Doh!, of course, how could I forget pkcon refresh!, problem fixed, thanks osetr! :)
PawelSpoon
Sun, 2018/11/04 - 10:10
Permalink
Could not update on os 3.0 due to missing hci attach...
osetr
Sun, 2018/11/04 - 12:24
Permalink
There are some troubles with jolla repos after upgrade. Try to run
devel-su pkcon refresh
.huuhaa
Sun, 2018/11/04 - 14:12
Permalink
This doesn't seem to help me. I did factory reset and upgraded to SFOS3 on Jolla 1 and installed Storeman and enabled some repos. Now none of the SFOS apps seems to have internet connection while android apps does have.
I Downloaded latest Storeman with Firefox Android and then ssh to my Jolla and went to Android Downloads folders (haven't yet install file browser and now can't), installed that latest Storeman via terminal and the tried to:
[root@Sailfish nemo]# pkcon refresh
Refreshing cache
Refreshing software list
Finished
Fatal error: Download (curl) error for 'https://store-repository.jolla.com/releases/3.0.0.5/jolla-hw/adaptation-...':
Error code: Connection failed
Error message: Could not resolve host: store-repository.jolla.com
osetr
Sun, 2018/11/04 - 16:46
Permalink
Yes, I had the same issue with unresolvable jolla repos.and I dealed with it by using VPN.
huuhaa
Mon, 2018/11/05 - 21:08
Permalink
Hmm.. I don't know why or how VPN should help, but I do have Windscribe Pro account, just never even tried to st it up to Sailfish OS. Any pointer for this one?
Edit:
Followed this route: https://windscribe.com/guides/manual_android#openvpn
Sailfish VPN is at state connecting...
Edit 3: VPN Finally connected and after that pkcon refresh worked. Phew ( & Thanks!)
I assume it won't be able to connect cause it doesn't seem to able to connect internet, even when it obviously does connect cause all android apps have internet connection..Edit 2: I shared Android data connection as hotspot and turned VPN ON at android (even thought I still don't know why should VPN matter here), then tried again via phone fingerterm, but till same error message.scanner
Sun, 2018/11/04 - 16:19
Permalink
have you tried just executing it again? - that worked for me.
Pages