Pure Maps

Rating: 
4.91241
Your rating: None Average: 4.9 (137 votes)

Pure Maps is a full-featured map and navigation application allowing you to explore maps, search for addresses and points of interest, as well as assist with navigation. For that, it uses online or offline service providers.

Offline maps, search and routing is possible with OSM Scout Server. Pure Maps will list OSM Scout Server among the providers if you have it installed. For it work, you'll also need to have the server running and map data on your device. See the OSM Scout Server documentation for installation instructions and follow setup instructions for Poor Maps.

Note: Online maps users are requested to register their own Mapbox GL key and enter it through the preferences of the application. This will allow us to use default key for application testing and provide the service without hitting free tier limits. Reasoning behind the requst is explained at TMO post, see follow up messages on TMO pages for users feedback and small details on how to enable and test the personal key. Note that without significant number of users moving to the personal keys, Mapbox key will be revoked and the users of Mapbox tiles will not be able to access it.

Note, SFOS releases support: As starting from version 2.7.5 Pure Maps relies on QtPositioning 5.4, SFOS versions before 4.0 are not supported. Corresponding commits are 616c406a7efdb1fe9cfa841ff0bbc8250860afb0 and ed4290634753f1bdcf962de35f36e0f092249616.

As of 23 Jan 2019, the public Mapbox access key has been revoked. Users are welcome to register their private key in the application.

Requirements:

  • Mapbox GL Native QML component for map display and interaction, should be installed as a dependency automatically.
  • Voice navigation requires that you manually install a text-to-speech (TTS) engine – Mimic, Flite, PicoTTS and Espeak are supported. Their quality is about in that order, with Mimic and PicoTTS available from this repository. See corresponding TTS engines for language covereage.

Pure Maps is a fork of WhoGo Maps and continues its legacy. Reasons for forking described at corresponding post.

License: GPLv3

Source code: https://github.com/rinigus/pure-maps

Translations: https://www.transifex.com/rinigus/pure-maps

Official TMO thread: https://talk.maemo.org/showthread.php?p=1547484

Matrix chat: #pure-maps:matrix.org

Donations: https://rinigus.github.io/donate

Screenshots: 
Application versions: 
AttachmentSizeDate
File harbour-pure-maps-1.29.2-1.noarch.rpm1.63 MB24/10/2020 - 10:00
File harbour-pure-maps-2.0.0-1.2.1.jolla_.armv7hl.rpm1.21 MB31/10/2020 - 11:17
File harbour-pure-maps-2.0.0-1.2.1.jolla_.i486.rpm1.21 MB31/10/2020 - 11:17
File harbour-pure-maps-2.1.0-1.5.1.jolla_.i486.rpm1.89 MB26/11/2020 - 21:25
File harbour-pure-maps-2.1.0-1.5.1.jolla_.armv7hl.rpm1.72 MB26/11/2020 - 21:25
File harbour-pure-maps-2.1.1-1.7.1.jolla_.i486.rpm1.89 MB30/11/2020 - 20:14
File harbour-pure-maps-2.1.1-1.7.1.jolla_.armv7hl.rpm1.72 MB30/11/2020 - 20:14
File harbour-pure-maps-2.2.0-1.8.1.jolla_.armv7hl.rpm1.74 MB16/12/2020 - 22:55
File harbour-pure-maps-2.2.0-1.8.1.jolla_.i486.rpm1.9 MB16/12/2020 - 22:55
File harbour-pure-maps-2.3.0-1.11.1.jolla_.armv7hl.rpm1.72 MB31/12/2020 - 18:09
File harbour-pure-maps-2.3.0-1.11.1.jolla_.i486.rpm1.89 MB31/12/2020 - 18:09
File harbour-pure-maps-2.4.0-1.12.1.jolla_.armv7hl.rpm1.73 MB06/01/2021 - 00:04
File harbour-pure-maps-2.4.0-1.12.1.jolla_.i486.rpm1.89 MB06/01/2021 - 00:04
File harbour-pure-maps-2.4.1-1.13.1.jolla_.i486.rpm1.89 MB08/01/2021 - 22:38
File harbour-pure-maps-2.4.1-1.13.1.jolla_.armv7hl.rpm1.73 MB08/01/2021 - 22:38
File harbour-pure-maps-2.5.0-1.14.1.jolla_.i486.rpm1.97 MB03/02/2021 - 23:47
File harbour-pure-maps-2.5.0-1.14.1.jolla_.armv7hl.rpm1.8 MB03/02/2021 - 23:47
File harbour-pure-maps-2.6.0-1.15.1.jolla_.i486.rpm1.99 MB20/02/2021 - 17:27
File harbour-pure-maps-2.6.0-1.15.1.jolla_.armv7hl.rpm1.82 MB20/02/2021 - 17:27
File harbour-pure-maps-2.6.5-1.16.1.jolla_.armv7hl.rpm1.82 MB30/03/2021 - 21:28
File harbour-pure-maps-2.6.5-1.16.1.jolla_.i486.rpm1.99 MB30/03/2021 - 21:28
File harbour-pure-maps-2.7.1-1.aarch64.rpm1.85 MB16/04/2021 - 21:29
File harbour-pure-maps-2.7.5-1.aarch64.rpm1.85 MB22/05/2021 - 18:13
File harbour-pure-maps-2.7.5-1.armv7hl.rpm1.83 MB22/05/2021 - 18:13
File harbour-pure-maps-2.7.5-1.i486.rpm1.99 MB22/05/2021 - 18:13

Comments

danfin's picture

also quite a pity: Edits in OpenStreetMap do not carry over quickly to Pure Maps

danfin's picture

quite a pity, pure maps does not display much info on stuff like ev charge stations. These become increasingly popular and it might be good to ddisplay what kinds of plugs or sockets are available.

Malakay's picture

Hi Rinigus, is any way how to open geo link in pure maps? For example geo:50.158,17.030?q=ks. When I open it with qr reader, it runs pure maps, but i need to set those coordinates as a target for navigation.is any way how to do this?

rinigus's picture

Hi Malakay

there is a command line support for geo: as well. It may got broken in the last releases (see and comment at https://github.com/rinigus/pure-maps/issues/82). It should open location given the coordinates and then user will be able to proceed from there (bookmark, route to it, search nearby).

There is also DBus interface provided by Pure Maps. If you have more specific requirement, you may want to look into that.

maier's picture

Fyi. After install of new SFOS it is working again with position. OSM Server i have not installed so far.

maier's picture

I have installed Pure Maps. It was working. After installing OSM Scout Server i didn't get a Position / GSM information. On a xperia 10 II

mezgerg's picture

Hi.

Is it possible to have different render styles in PureMaps, for example hiking theme with elevation lines and hiking routes? I know OSM has these data but im not famiiliar how Osm Scout Server works. Is it possible to achieve this?

Thanks
Gary

rinigus's picture

Yes, it is possible. Just someone has to work on it. See https://github.com/rinigus/osmscout-server/issues/304

TMavica's picture

Can u build a 64 bit mapbox too?

rinigus's picture

Uploaded, should be now available for aarch64 as well

rinigus's picture

Yes, now I can using tbuilder. Actually did, but it was with the debug symbols blowing up mapbox-gl into 100mb+ package. Would start the builds tonight again

nazzareno's picture

When I try to install it, it says that I miss libcrypto....etc. What's happening on my xperia x?

rinigus's picture

I assume you haven't updated to the latest SFOS version. The latest uploaded version was compiled for SFOS 4.0. Corresponding binaries for older SFOS releases are at https://build.merproject.org/project/show/home:rinigus:maps

nazzareno's picture

Exactly, I have latest 3 version of sfos. I'll try what you suggest to me. Thanks a lot bro ;-)

Bramba's picture

Would it be possible to add an option to pick different colors for POIs in their "Edit Bookmark" menue? Currently they are all drawn in blue color by default.

For example, I would like to color ATMs different than a viewpoint or a restaurant. :-) Especially in cities with many POIs, it is hard to see what the POI should indicate without tapping on it.

BlaeX's picture

Great app, thanks for your continuous effort!

linuxsquad's picture

Hello,

I've updated to Sailfish 4.0.1 (Sony XA2) couple days ago. Not sure whether it is the application or OS fault, but after 5-10 mins navigation the phone goes into freeze, screen not responds and eventually I have to restart the phone.

The application worked flawlessly on 3.5 on the same hardware.

Thanks

rinigus's picture

Hard to say what can cause it on Pure Maps side. For sure, app should not be able to freeze the phone OS. Please file an issue on Sailfish Forum https://forum.sailfishos.org against SFOS 4.0.1

alexander_70's picture

Sorry if this has been dealt with before, but on my nexus 5 and 7(Ubuntu touch)  the pointer/blue circle jumps doesnt move smoothly. Ive set smooth animation, which works well for the background/map, but the pointer still jumps.  its not the end of the world but it would be great to have it move smoothly. Love the app.  Thank you. 

rinigus's picture

Hi! The corresponding setting should be Preferences/Navigation/Smooth position animation. That one should take care of it and make it move smoothly. If that is set, I don't know why it doesn't work well on UT. Note that it works in navigation / follow me modes only

danfin's picture

(just a silly question): Can I read GPX POI's into PureMaps, and how would I do that?

rinigus's picture

No, you cannot.  Unless you write a small converter and load them directly into settings file pois.json (see Pure Maps .config folder). Which is relatively simple to do and you are welcome to contribute the script.

PS: Pure Maps should be closed while updating that file. Otherwise it maybe overwritten by Pure Maps.

danfin's picture

hullo Rinigus - I am a graphic designer, and even realtively simple computer science is really difficult for me.

Bramba's picture

Could it be true that Pure Maps does not support navigation (neither voice nor graphical) when using a gpx-track?

rinigus's picture

It does support navigation via GPX, select under routers. At least it should. Otherwise, please file as a bug.

Just GPX does not have any instructions embedded into the file, so you can use it just as graphical and there will be no voice commands. 

With OSM Scout Server installed and maps covering your area, you could switch to offline mode and use GPX Smart. This will process GPX file and make instructions for it. 

I am pretty sure I have been explaining that to someone before. Unfortunately, nobody has worked on Pure Maps homepage that would be a great place to add such info. As we have many users who state that they cannot code, it is a chance for them to contribute and write homepages for apps.

Bramba's picture

Dear rinigus,

I am still in love with Pure Maps. :-) Thank you so much for your great work! Now I have started using Pure Maps with Mimic during extended cycling trips. My next tour will be a bit rough and long, so I need to save battery energy of the phone to preserve navigation until the end of the trip.

Is it possible to run Pure Maps navigation without display, only using Mimic voice navigation? Maybe it works fine to just minimize the Pure Maps app while navigation still continues and direction commands will be transmitted by Mimic?

rinigus's picture

Sure, this functionality is available for some time now. You can separately control screensaver and sleep under Device/Preferences. In your case, set "Prevent sleep" to "While navigating", start navigation and switch off the screen by power button. You should get instructions spoken. BTW, if you have smartwatch supported by Amazfish, there is an integration with navigation worked on by Piggz to get instructions on the watch as well.

Bramba's picture

Awesome, thank you! :-)

So three more questions:

1.) With sleep-prevention enabled, I just need to start the navigation and afterwards push the power button to switch off the display, but navigation will still continue?
2.) Should I better set "Prevent Screensaver" to "never", because otherwise Pure Maps will keep the display switched on (except I do minimize the app)?
3.) Does the Sailfish-option "Use flip cover to control display" disturb the app?

rinigus's picture

Frankly, these are the questions you could find solutions to by testing. 1 - I think so. 2 - You can do that as well. 3- don't know.

danfin's picture

nearby venues > EV Charging Station finds not many charging stations, which is a pity.

Pages