Pure Maps

Rating: 
4.90566
Your rating: None Average: 4.9 (106 votes)

Pure Maps is a full-featured map and navigation application allowing you to explore maps, search for addresses and points of interest, as well as assist with navigation. For that, it uses online or offline service providers.

Offline maps, search and routing is possible with OSM Scout Server. Pure Maps will list OSM Scout Server among the providers if you have it installed. For it work, you'll also need to have the server running and map data on your device. See the OSM Scout Server documentation for installation instructions and follow setup instructions for Poor Maps.

Note: Online maps users are requested to register their own Mapbox GL key and enter it through the preferences of the application. This will allow us to use default key for application testing and provide the service without hitting free tier limits. Reasoning behind the requst is explained at TMO post, see follow up messages on TMO pages for users feedback and small details on how to enable and test the personal key. Note that without significant number of users moving to the personal keys, Mapbox key will be revoked and the users of Mapbox tiles will not be able to access it.

As of 23 Jan 2019, the public Mapbox access key has been revoked. Users are welcome to register their private key in the application.

Requirements:

  • Mapbox GL Native QML component for map display and interaction, should be installed as a dependency automatically.
  • Voice navigation requires that you manually install a text-to-speech (TTS) engine – Mimic, Flite, PicoTTS and Espeak are supported. Their quality is about in that order, with Mimic and PicoTTS available from this repository. See corresponding TTS engines for language covereage.

Pure Maps is a fork of WhoGo Maps and continues its legacy. Reasons for forking described at corresponding post.

License: GPLv3

Source code: https://github.com/rinigus/pure-maps

Translations: https://www.transifex.com/rinigus/pure-maps

Official TMO thread: https://talk.maemo.org/showthread.php?p=1547484

Donations: https://rinigus.github.io/donate

Screenshots: 
Application versions: 
AttachmentSizeDate
File harbour-pure-maps-1.2.0-1.noarch.rpm883.42 KB23/08/2018 - 17:07
File harbour-pure-maps-1.3.0-1.noarch.rpm900.37 KB26/08/2018 - 14:26
File harbour-pure-maps-1.3.1-1.noarch.rpm911.2 KB29/08/2018 - 16:46
File harbour-pure-maps-1.4.0-1.noarch.rpm968.28 KB03/09/2018 - 19:02
File harbour-pure-maps-1.4.2-1.noarch.rpm991.45 KB05/09/2018 - 20:25
File harbour-pure-maps-1.5.0-1.noarch.rpm1.03 MB16/09/2018 - 10:34
File harbour-pure-maps-1.5.1-1.noarch.rpm1.04 MB16/09/2018 - 21:40
File harbour-pure-maps-1.6.1-1.noarch.rpm1.05 MB23/09/2018 - 13:47
File harbour-pure-maps-1.7.0-1.noarch.rpm1.09 MB04/10/2018 - 22:12
File harbour-pure-maps-1.7.1-1.noarch.rpm1.09 MB07/10/2018 - 22:54
File harbour-pure-maps-1.8.0-1.noarch.rpm1.11 MB28/10/2018 - 17:31
File harbour-pure-maps-1.9.0-1.noarch.rpm1.12 MB21/11/2018 - 00:22
File harbour-pure-maps-1.10.0-1.noarch.rpm1.14 MB05/12/2018 - 00:36
File harbour-pure-maps-1.10.1-1.noarch.rpm1.15 MB08/12/2018 - 00:08
File harbour-pure-maps-1.11.0-1.noarch.rpm1.15 MB13/12/2018 - 23:22
File harbour-pure-maps-1.12.0-1.noarch.rpm1.16 MB28/12/2018 - 20:25
File harbour-pure-maps-1.13.0-1.noarch.rpm1.15 MB06/01/2019 - 21:52
File harbour-pure-maps-1.14.0-1.noarch.rpm1.15 MB13/01/2019 - 16:13
File harbour-pure-maps-1.15.0-1.noarch.rpm1.05 MB02/02/2019 - 12:46
File harbour-pure-maps-1.16.0-1.noarch.rpm1.57 MB16/02/2019 - 12:46
File harbour-pure-maps-1.16.1-1.noarch.rpm1.57 MB17/02/2019 - 21:03
File harbour-pure-maps-1.17.0-1.noarch.rpm1.59 MB26/02/2019 - 00:25
File harbour-pure-maps-1.18.0-1.noarch.rpm1.27 MB21/03/2019 - 23:55
File harbour-pure-maps-1.19.0-1.noarch.rpm1.28 MB30/03/2019 - 20:28
File harbour-pure-maps-1.20.0-1.noarch.rpm1.28 MB19/05/2019 - 20:39
File harbour-pure-maps-1.21.1-1.noarch.rpm1.19 MB01/07/2019 - 16:55
File harbour-pure-maps-1.22.0-1.noarch.rpm1.22 MB29/07/2019 - 22:41
File harbour-pure-maps-1.23.0-1.noarch.rpm1.47 MB25/08/2019 - 09:50
File harbour-pure-maps-1.24.0-1.noarch.rpm1.47 MB26/08/2019 - 23:05
File harbour-pure-maps-1.25.2-1.noarch.rpm1.48 MB14/09/2019 - 16:27
File harbour-pure-maps-1.26.0-1.noarch.rpm1.51 MB04/10/2019 - 20:22
File harbour-pure-maps-1.26.1-1.noarch.rpm1.52 MB08/10/2019 - 20:55
File harbour-pure-maps-1.26.2-1.noarch.rpm1.53 MB08/02/2020 - 12:07

Comments

griebjoe's picture

Great App, many thanks!

Is there a sound-only option? I would like to turn the display off without stopping the app.

ozamyatin's picture

Very nice app, thanks

rossholmes's picture

Never had a better free navigator on any of my device
Your work is greatly appreciated!

Bramba's picture

This app is still one of the very best pieces of software that Sailfish has ever seen! :-) Thank you very much!

Two questions:

1.) What does profile "mixed" do in detail? Sure, "online" and "offline" is making sense, but what is "mixed"? Does the mixed profile take building data from online maps while using the offline map as a base layer?

2.) Could you add an option to create a backup of the favorite places/bookmarks/points of interest? I fear that I would loose them when reinstalling Sailfish to new devices.

rinigus's picture

Thanks!

1: yes, the mixed profile aloows you to combine online/offline services as you please. such as choose what is used for map tiles, search, and routing regardless on classification of the services.

2: if you back up .config folder, you will backup all settings for Pure Maps, including POIs. Will have to figure out still how to sync between devices. Should be possible with Nextcloud/Maps

Kabouik's picture

I am trying to install Pure Maps on a Jolla C freshly factory reset and upgraded to the latest SFOS version, but the installation fails without any error message. In Storeman, after adding you repository, installation attempts just result in "Unknown" instead of "Installed" or "Not installed" where Storeman normally shows the status of the application. In terminal, with "apk install-local" on the file manually downloaded from openrepos (latest version), there is just no output at all. Any ideas? OSM Scout installed correctly, so the repo works.

rinigus's picture

try pkcon refresh in terminal and then try to install again

Kobieknight's picture

Despite me indicating that I would like to avoid tolls, I'm still receiving directions to proceed through tollways (Xperia X 3.1.0.11, US Chicago-Midwest)

rinigus's picture

Please specify which provider are you using. If it is OSM Scout Server, latest version, I will need specific example of your settings and route. Note that we will probably need example publicly later, so find the example that is OK for you to be disclosed in terms of privacy.

Kobieknight's picture

It doesn't matter which map I use (Mapbox, Here, or OSM) there are times despite selecting avoid, when I set the navigation, it tries to direct me through toll roads. I'll try to send you an example.

Pohli's picture

Switching maps should have no effect, try different routing engines instead. From main menu go to Navigation and then check the pulley menu.

matveich's picture

Search is not working with OSM server. It either returns no result or application stops working and restarts. Any idea what can be the problem?

Pure map version: 1.25.2

OSM scout server version: 1.15.0-1.119.1

rinigus's picture

Sounds like out-of-memory killer. Have you restricted number of languages parsed by the server when you request the address? How much RAM do you have on your device?

matveich's picture

Only one language(en). Available RAM: ~800mb(Jolla). 

From what I can tell the problem is with libpostal, used by OSM server. The search works fine without it, but not for postcodes. Not sure if the problem is with search engine or maps.

Btw, is it possible to route along specific waypoints? Or drag created existing waypoints?

rinigus's picture

libpostal does use RAM for address processing. to use without it, please see Geocoders section in https://rinigus.github.io/osmscout-server/en/

dfstorm's picture

This app is geeting better and better. Good job.

glanternier's picture

Wow! So fast :-) Thanks!

glanternier's picture

Hello, after upgrade to 1.25.0-1 the search isn't returning any results anymore.

rinigus's picture

Bugfix version released

rinigus's picture

Just fixed it few minutes ago. New release will be out soon - want to fix one script as well

jakecn's picture

Can you add metro lines?

rinigus's picture

please more specific: online or offline? for online, I will need corresponding data source and style. for offline, need to implement import and style. All is possible (esp offline), requires work though

lispy's picture

It's perfect now.

raffles496's picture

Thanks so much for this app, is amazing.
This update fixed the problem with buttons in my XA2 with 3.1.0.11.

csg1976's picture

Thanks a lot for this marvel!

lispy's picture

Great for buttonfix! Storeman just needed some time. I was impatient. Thx for quick reply...

lispy's picture

Installed the update, still no button images, removed it via the Appdrawer, tried to reinstall and now storeman says: unknown. No more install option. Can I purge via console?

rinigus's picture

no buttons are still due to iconbutton issue, as reported earlier and discussed over here, official TMO thread, and at TJC. I reimplemented the corresponding button last night and I hope that it will fix it for sfos 3.1.x users.

As for Storeman issues - no idea. you should be able to install via console as well, see zypper for example. Maybe Storeman needs restart or something else.

ferlanero's picture

Last update is absolutely amazing, thanks!

Yener's picture

nice work, very good

Pages