Patch: MazeLock
Patch available to install from Patchmanager 2.0. Updates for newer SailfishOS versions would be only available via web catalog. No new updates in openrepos rpm packages.
---
Devicelock patch enabling MazeLock for SailfishOS
Patch working only on 2.0.4 release
For older releases download second rpm file drom site and install it manually
Github: https://github.com/CODeRUS/sailfishos-mazelock-patch
Package for patchmanager: https://openrepos.net/content/sfietkonstantin/patchmanager
Details:
- support up to 6x6 maze grid
- long press showing keypad
- entering "62935625" in keypad mode or "mazelock" in alphanumeric mode showing maze lock again
- after each 3rd wrong code input you need to draw automatically choosed line to continue entering code
- when setting new code symbols won't be masked, you can keep in mind entered code in case of system crash
MazeLock can be configured with settings applet:
- Mask input characters immediately
- Draw colored lines between nodes
- Maze size from 3x3 to 6x6 (3x3 size is the only availbale option for numeric devicelock code, for bigger maze use https://openrepos.net/content/coderus/patch-enable-alphanumeric-devicelock-settings patch)
Donations are welcome =)
Screenshots:
Category:
Keywords:
Application versions:
| Attachment | Size | Date |
|---|---|---|
 sailfishos-mazelock-patch-0.0.11-1.noarch.rpm | 8.07 KB | 14/01/2015 - 23:46 |
| sailfishos-mazelock-patch-0.0.12-1.noarch.rpm | 7.97 KB | 19/02/2015 - 17:32 |
| sailfishos-mazelock-patch-0.0.13-1.noarch.rpm | 10.95 KB | 19/04/2015 - 11:55 |
| sailfishos-mazelock-patch-0.1.2-1.noarch.rpm | 13.28 KB | 17/09/2015 - 08:57 |
| sailfishos-mazelock-patch-0.1.3-1.noarch.rpm | 13.42 KB | 13/03/2016 - 18:57 |
| sailfishos-mazelock-patch-0.2.0-1.noarch.rpm | 13.7 KB | 05/10/2016 - 20:57 |
| sailfishos-mazelock-patch-0.2.1-1.noarch.rpm | 13.58 KB | 25/10/2016 - 17:37 |
Comments
csg1976
Mon, 2019/04/01 - 10:08
Permalink
If this would run on 3.0.2.8, I'd be soooo happy.
Spezifish
Mon, 2017/10/23 - 21:29
Permalink
Maze-Lock is a fine patch, but it is incompatible to Sailfish 2.1.2.3 at the moment. After I installed and activate this patch there is no way to log int my mobile phone at the moment (23.10.2017). Becouse the white points disappear. The only way to access t your phone is via SSH-Connection and Deleting Mazel lock from the terminal. I hope this will be fix in the future.
coneosilence
Thu, 2018/01/11 - 01:56
Permalink
Hi. I tried SSH via 192.168.2.15 USB 'Remote Terminal' Win10 64 but no luck. How did you delete patch?
Edit: Am running Sailfish X on F5122
Edit: see this post for Xperia X fix
R1v3r
Sun, 2017/10/08 - 22:28
Permalink
Anyone else has problems with mazelock on jolla c? My touchscreen is very awful when using maze lock.
Have you coderus jolla c? Does it work correctly?
sfbsfb
Thu, 2017/08/31 - 15:09
Permalink
Not installable on 2.1.1.26.
xeon
Tue, 2017/08/01 - 15:20
Permalink
i've an intex aqua fish device converted to jolla c with 2.1.1.24 intalled ,after applying mazelock patch and rebooting my lock screen is blank with only ambience image showing .i can only access camera from lock screen and nothing else.tried connecting device via telenet and using commands given in this link"https://together.jolla.com/question/138839/how-to-run-command-from-recov..." to revert patch but some commands of mounting are not working for my device ,shows resource or device busy error.pls help me revert patch by providing step by step guide.thank u.
bathizte
Mon, 2017/08/14 - 16:38
Permalink
Hi.
Same thing here on a Jolla 1, Hopefully what follows will help others.
I followed your link to start the phone in rescue mode, connected using telnet and opened a shell.
Then
rpm -qf /usr/lib/qt5/qml/com/jolla/settings/system/MazeInput.qml # to check package namerpm -e sailfishos-mazelock-patch-0.2.1-1.noarch.rpm # to uninstall itexit the chroot, reboot the phone and voilà !
For your commands for mounting wich doesn't work, did you see this comment from coderus extracted from your link ?
jor Jolla 1 you do:
For Jolla C do:
eisen
Thu, 2016/12/29 - 02:52
Permalink
installed it on webkatalog, how do i activate it?
qiang1315231
Sat, 2016/12/24 - 19:57
Permalink
After the installation of the maze is too small, in the settings to change the size of the maze did not change, how to operate?
shanti
Fri, 2017/11/17 - 01:30
Permalink
in actual version its really way small on Xepria X .. i'd say more than 50% of portrait-screenwidth is actually wasted on a 2MP display
Xperia X - Mazelock screenshot
coderus
Sun, 2016/12/25 - 20:06
Permalink
What you mean small? Show me screenshot.
hoodlum
Tue, 2017/04/18 - 05:31
Permalink
Возможно, он имел в виду, что настройки всегда стоят на 0 и не сохраняются на других значения. У меня так же почему то на OPX после обновления до 2.1
elastic
Thu, 2016/10/27 - 23:08
Permalink
Thanx for the fix - no need to change it - in the new size it's faster to unlock and safer as your thumb hides most of the maze :-)
PawelSpoon
Fri, 2016/10/07 - 15:48
Permalink
same here. since 2.0.4 i cant use mazelock. my pin was 3 2 4.. and it does not get recognized. i had to change it to 1 4 ... cause swipe down works, while swipe to left not
PawelSpoon
Fri, 2016/10/14 - 11:43
Permalink
i have now an aquafish also on 2.0.4 and have the same issue there:
a code like : 1 4 7 8 9 works but 3 2 1 4 not cause neither 3 nor 2 get recognized
i have the feeling that it is related to the question: does the swipe start verticaly or horizontaly
mautz
Thu, 2016/10/06 - 16:19
Permalink
Hi,
in the patch version for SFOS 2.04, you cannot swipe over the first dot anymore to get it recognized, instead you have to touch it precisely. Could you modify your patch to return the old behaviour? Thank you.
coderus
Thu, 2016/10/06 - 19:26
Permalink
i dont understand, works file for me.
jamar
Thu, 2016/10/06 - 23:08
Permalink
Hi Coderus,
I have the same problem since last update (on Fairphone 2, don't know if its relevant). Please take a look at my video of this problem, it might give you a better explanation:
https://youtu.be/3nbA5oAtvYc
Well, it actually makes MazeLock more secure, but on the other hand it's also a bit annoying when you want to access your phone quickly. So a fix would be greatly appreciated ;-) Previous version on 2.0.2.51 worked fine.
Ingvix
Sun, 2016/10/16 - 10:36
Permalink
I'm having the same problem. If you start the swipe even a bit outside the maze, as one often may do if one's code doesn't start from 5, it won't get recognized by the maze. The mouse area of the maze should be a bit larger than the maze itself.
hoodlum
Fri, 2016/10/21 - 17:51
Permalink
I have the same problem
OPX, 2.0.4.14
damuhib
Mon, 2016/07/11 - 19:52
Permalink
Nevermind! found long press!
damuhib
Mon, 2016/07/11 - 19:45
Permalink
i downloaded mazelock a few minutes ago turened the patch on and reseted the home screen to activated the patch. before instaling the patch i had a password but i didn't set any maze password. my old password has 77 in the middle of it and now i can't use 77 in mazelock. now i cannot access my phone and i really don't wanna reset my phone and i live in bangladesh, over here i don't even have any opton to send it back to jolla.
what should i do?
and what does "long press showing keypad" means? where should i press for long time?
GooogeR
Mon, 2016/03/14 - 21:21
Permalink
Андрей Привет! Нужна твоя помощь, где мы можем с тобой связаться?
coderus
Mon, 2016/03/14 - 21:31
Permalink
coderusinbox@gmail.com
naytsyrhc
Mon, 2016/03/14 - 11:48
Permalink
I can confirm that the problem with figure shown on activating device is connected with less animation patch. At least on 2.0.1.7 problem exists with patch enabled and doesn't without it.
GiaTux
Wed, 2016/02/24 - 22:24
Permalink
I need Help!
MY phone is permanently locked and in recovery mode I have to type in my pin.
What is my pin if My Mazelook looks like tihis:
* * *
* + *
* + *
The stars are my pin, and in the middle I didn´t draw anything.
coderus
Thu, 2016/02/25 - 08:54
Permalink
mazelock is
123
456
789
so your code is 7412369
jpsorvisto
Mon, 2016/01/25 - 10:58
Permalink
I have noticed that in some situations the Mazelock figure is automatic displayed already without you have drew it. This problem has came with new OS version 2.0.1.7. This is security issue!
coderus
Mon, 2016/01/25 - 11:07
Permalink
No idea what you talking about.
jpsorvisto
Sun, 2016/02/21 - 21:50
Permalink
If I double click to wake up my phone mazelock figure is already shown even phone is locked.
Pages