harbour-fotokopierer-0.1.0-1.armv7hl.rpm | 2.22 MB | 19/05/2019 - 00:05 |
harbour-fotokopierer-0.2-1.armv7hl.rpm | 2.23 MB | 27/05/2019 - 13:34 |
harbour-fotokopierer-0.2-2.armv7hl.rpm | 2.23 MB | 27/05/2019 - 15:49 |
harbour-fotokopierer-0.2-3.armv7hl.rpm | 2.22 MB | 28/05/2019 - 00:33 |
harbour-fotokopierer-0.2.1-1.armv7hl.rpm | 2.22 MB | 28/05/2019 - 20:38 |
harbour-fotokopierer-0.2.1-2.armv7hl.rpm | 2.22 MB | 28/05/2019 - 22:58 |
harbour-fotokopierer-0.2.2-1.armv7hl.rpm | 2.12 MB | 18/04/2020 - 19:45 |
harbour-fotokopierer-0.2.3-1.armv7hl.rpm | 2.12 MB | 19/04/2020 - 14:15 |
harbour-fotokopierer-0.2.3-2.armv7hl.rpm | 2.12 MB | 19/04/2020 - 14:32 |
harbour-fotokopierer-0.2.4-1.armv7hl.rpm | 2.13 MB | 21/04/2020 - 21:24 |
harbour-fotokopierer-0.2.5-1.aarch64.rpm | 2.01 MB | 31/05/2021 - 22:12 |
harbour-fotokopierer-0.2.5-1.armv7hl.rpm | 2.03 MB | 31/05/2021 - 22:12 |
harbour-fotokopierer-0.2.6-1.aarch64.rpm | 2.01 MB | 01/06/2021 - 11:51 |
harbour-fotokopierer-0.2.6-1.armv7hl.rpm | 2.03 MB | 01/06/2021 - 11:51 |
harbour-fotokopierer-0.3.0-1.aarch64.rpm | 2.35 MB | 05/06/2021 - 17:18 |
harbour-fotokopierer-0.3.0-1.armv7hl.rpm | 2.2 MB | 05/06/2021 - 17:18 |
harbour-fotokopierer-0.3.0-1.i486.rpm | 2.23 MB | 05/06/2021 - 17:18 |
harbour-fotokopierer-0.3.1-1.aarch64.rpm | 2.57 MB | 06/06/2021 - 15:18 |
harbour-fotokopierer-0.3.1-1.armv7hl.rpm | 2.42 MB | 06/06/2021 - 15:18 |
harbour-fotokopierer-0.3.1-1.i486.rpm | 2.76 MB | 06/06/2021 - 15:18 |
harbour-fotokopierer-0.3.2-1.i486.rpm | 2.56 MB | 09/06/2021 - 23:22 |
harbour-fotokopierer-0.3.2-1.armv7hl.rpm | 2.22 MB | 09/06/2021 - 23:22 |
harbour-fotokopierer-0.3.2-1.aarch64.rpm | 2.36 MB | 09/06/2021 - 23:22 |
harbour-fotokopierer-0.4.0-1.aarch64.rpm | 2.73 MB | 25/06/2021 - 00:47 |
harbour-fotokopierer-0.4.0-1.armv7hl.rpm | 2.57 MB | 25/06/2021 - 00:47 |
harbour-fotokopierer-0.4.0-1.i486.rpm | 2.92 MB | 25/06/2021 - 00:47 |
harbour-fotokopierer-0.4.1-1.aarch64.rpm | 2.51 MB | 25/06/2021 - 11:53 |
harbour-fotokopierer-0.4.1-1.armv7hl.rpm | 2.36 MB | 25/06/2021 - 11:53 |
harbour-fotokopierer-0.4.1-1.i486.rpm | 2.71 MB | 25/06/2021 - 11:53 |
harbour-fotokopierer-0.4.2-1.aarch64.rpm | 2.51 MB | 02/07/2021 - 12:11 |
harbour-fotokopierer-0.4.2-1.armv7hl.rpm | 2.36 MB | 02/07/2021 - 12:11 |
harbour-fotokopierer-0.4.2-1.i486.rpm | 2.71 MB | 02/07/2021 - 12:11 |
harbour-fotokopierer-0.4.3-1.aarch64.rpm | 2.51 MB | 01/11/2021 - 21:52 |
harbour-fotokopierer-0.4.3-1.armv7hl.rpm | 2.36 MB | 01/11/2021 - 21:52 |
harbour-fotokopierer-0.4.3-1.i486.rpm | 2.71 MB | 01/11/2021 - 21:52 |
harbour-fotokopierer-0.4.3-2.aarch64.rpm | 2.51 MB | 11/11/2021 - 19:15 |
harbour-fotokopierer-0.4.3-2.armv7hl.rpm | 2.37 MB | 11/11/2021 - 19:15 |
harbour-fotokopierer-0.4.3-2.i486.rpm | 2.35 MB | 11/11/2021 - 19:15 |
harbour-fotokopierer-0.4.4-1.aarch64.rpm | 2.51 MB | 13/11/2021 - 22:14 |
harbour-fotokopierer-0.4.4-1.armv7hl.rpm | 2.37 MB | 13/11/2021 - 22:14 |
harbour-fotokopierer-0.4.4-1.i486.rpm | 2.35 MB | 13/11/2021 - 22:14 |
harbour-fotokopierer-0.4.5-1.aarch64.rpm | 2.52 MB | 22/03/2022 - 01:17 |
harbour-fotokopierer-0.4.5-1.armv7hl.rpm | 2.37 MB | 22/03/2022 - 01:17 |
harbour-fotokopierer-0.4.5-1.i486.rpm | 2.71 MB | 22/03/2022 - 01:17 |
harbour-fotokopierer-0.4.7-1.aarch64.rpm | 2.49 MB | 21/05/2023 - 23:27 |
harbour-fotokopierer-0.4.7-1.armv7hl.rpm | 2.36 MB | 21/05/2023 - 23:27 |
harbour-fotokopierer-0.4.7-1.i486.rpm | 2.66 MB | 21/05/2023 - 23:27 |
harbour-fotokopierer-0.4.7-2.aarch64.rpm | 2.78 MB | 22/05/2023 - 22:22 |
harbour-fotokopierer-0.4.7-2.armv7hl.rpm | 2.4 MB | 22/05/2023 - 22:22 |
harbour-fotokopierer-0.4.7-2.i486.rpm | 2.98 MB | 22/05/2023 - 22:22 |
Comments
Seven_of_nine
Mon, 2023/05/22 - 18:58
Permalink
I'm still excited of this app, will latest version 4.7.0 also be available on chum? (still V 0.4.6 there)
fifr
Mon, 2023/05/22 - 22:29
Permalink
Yes, should be there soon. I've been struggling a bit with the build process, but it seems to be resolved now.
darbess
Mon, 2021/11/29 - 16:08
Permalink
I’d like to thank you for this great app. I have a problem: after upgrading to 4.3.0.12 on an XPeria 10Plus, I can browse existing documents, but every time I tap on a ”+” icon, to add either a new document or a new page to an existing document, the app exits with the error:
harbour-fotokopierer: /usr/share/droidmedia/hybris.c:53: __resolve_sym: assertion "ptr != NULL" failed.
I am using 0.4.4-1.armv7hl
fifr
Tue, 2021/11/30 - 10:19
Permalink
I've never seen this error before and because I do not have access to an XPeria 10Plus device, it's hard to reproduce. As a first try, do earlier versions work (or what's the latest working version)?
darbess
Tue, 2021/11/30 - 14:51
Permalink
Never mind. Your app worked perfectly on 4.2 on my XPeria10Plus and works on my other 4.3.0.12 device, but I have now ascertained that, after upgrading the Xperia10Plus, every native app exits with an error while trying to access the camera (Android apps work, so it’s not a hardware problem). Most probably some library was corrupted during the upgrade. I am sure that after fixing this, Fotokopierer will work again. I’m sorry I have bothered you, and keep up the good work.
Seven_of_nine
Sat, 2021/11/27 - 16:51
Permalink
Works like a charm! Wonderful app! Thank you so much!
Seven_of_nine
Sun, 2021/11/14 - 01:33
Permalink
Xperia 10. Meanwhile problem is solved and Fotokopierer is running fine! Some system cleaning after the update to SFOS 4.3.0.12 was necessary.
Seven_of_nine
Thu, 2021/11/11 - 01:40
Permalink
Installation failed on SFOS 4.3.0.12 because of missing lib libcrypto.so.10 .
fifr
Thu, 2021/11/11 - 02:21
Permalink
On which device? The reason is probably, that i486 and armv7h versions are compiled for 3.4 targets, whereas the aarch64 version is compiled for 4.1 or so. I can compile everything for 4.1 or newer, but then these packages might not work on older Sailfish versions anymore (and some people prefer to stick with older versions for some time).
bach
Sat, 2021/10/30 - 22:48
Permalink
Great app! Thanks so much.
However, since upgrade to 4.2 on Xperia 10 II I have a problem with taking pics directly from the app. When I want to create a new document, I only have the spinning animation but the camera is never turned on. It used to work fine before and I can work around it by taking the pics using standard camera and then opening it from Fotokopierer's gallery. I tried to reinstall the app to no avail.
fifr
Mon, 2021/11/01 - 21:53
Permalink
Thanks for the report. I submitted a new version, which hopefully works. However, it's a dirty hack, to be honest.
bach
Sun, 2021/11/14 - 21:36
Permalink
Thanks for a quick fix. I can confirm that it works fine on 4.2 and after upgrading to 4.3 on Xperia 10 II
Malakay
Wed, 2021/06/09 - 19:42
Permalink
I found another problem - is any possibility to chamge how exported pdf files are named? I use syncthing and it doesn t work to sync expoeted pdf because : symbol in the filename. Could be replaced with - for example?
Malakay
Tue, 2021/06/08 - 22:41
Permalink
Oh, pity :( i started with tranalation by the way :)
Malakay
Tue, 2021/06/08 - 07:16
Permalink
Can you add Czech translation to POEditor? I will make it in few days :) thanks
Malakay
Tue, 2021/06/08 - 07:14
Permalink
Okay, i will do the translation :) viewfinder rotated like this: https://ibb.co/P4k4P79
fifr
Tue, 2021/06/08 - 12:27
Permalink
I have absolutely no idea why this happens and have no idea how to reproduce it.
Malakay
Mon, 2021/06/07 - 16:20
Permalink
Oh, by thw way, would you be pleased if I translate your app to my language?
fifr
Mon, 2021/06/07 - 16:30
Permalink
Sure, that would be nice. You can either use POEditor or translate the pot-file with the tool of your choice and send me the translation.
Malakay
Mon, 2021/06/07 - 16:19
Permalink
Oh, update has solved it :) thanks a lot :) i think it works even faster than before :) one more thing - when i turn to landscape to take picture, viewfinder is rotated wrong :D
fifr
Mon, 2021/06/07 - 16:23
Permalink
Wrong in what way? Actually, it should not be rotated at all because the orientation is (currently) fixed ...
Malakay
Mon, 2021/06/07 - 16:15
Permalink
So, does it have some solution? :)
Malakay
Sat, 2021/06/05 - 21:38
Permalink
Okay, how to start it from console?
fifr
Sat, 2021/06/05 - 22:21
Permalink
you need some terminal app (e.g. FingerTerm) and then run "harbour-fotokopierer" from the command line. It should show some more or less useful log output. Maybe there is a hint why the pdf-export fails
Malakay
Sun, 2021/06/06 - 03:13
Permalink
so, here it is:
https://vipmods.net/texthost/log-96268
I did:
turned on app, make a picture and next save as pdf
fifr
Sun, 2021/06/06 - 15:19
Permalink
Ok thanks. I think I found the problem. For some reason opencv compiled two incompatible versions of libjpeg, and using them for pdf-export didn't work ...
Malakay
Sat, 2021/06/05 - 20:03
Permalink
So, i have installed it finally. But - few problems occured:
1) image processing is really slow. I think that user planetos (developer of Imageworks) could help you to make those algoritms better :)
2) when I generate PDF, it tells me "error creating pdf file" and PDF cant be opened, because its damaged
fifr
Sat, 2021/06/05 - 20:11
Permalink
Thanks four your comments.
fifr
Sat, 2021/06/05 - 17:23
Permalink
I just released a new version (with a bunch of new bugs ;)) that is compiled for 3.4 (except on i486, here the compilation of opencv fails for some reason)
Malakay
Fri, 2021/06/04 - 23:44
Permalink
Thanks, tomorrow i will try :)
Pages