Kuri
Kuri is a sport tracking application for Sailfish OS. Kuri means "run" in Esperanto. Funnily it also means "discipline" in Finnish.
Notes:
- On SFOS 4.5 some user have problems to start or install Kuri. This is related to the deprecation and removal of QtBluetooth. For user which are affected by this issue qtconnectivity-bluetooth from OpenRepos can be installed. A proper fix is not yet available
- You need to enable the chum repo to resolve the Mapbox GL Native QML dependency for map display
- download the chum rpm for your architecture
- install the rpm, e.g. via the file browser
- install Kuri (if installation still does not work, perform a `devel-su pkcon refresh`)
- All strings should now be translatable, so please start translating
- Not everyting from the new Record Page is working, yet
- With v0.5 the location of the config file and recorded activities changed as preparation for a future Sailjail activation
- config is now stored in '.config/org.kuri/kuri/kuri.toml'
- activities are now stored in '.local/share/org.kuri/kuri'
- activities are migrated on first start, config is not migrated
Kuri takes inspirations from MeeRun, but it will take some time until all of MeeRuns features are implemented.
This application is a fork of Laufhelden by jdrescher. The reason for the fork is that it isn't maintained anymore.
Thanks to translators!
- Swedish - eson
- Polish - kormil
License: GPLv3
Source code: https://gitlab.com/elBoberido/kuri
Icons: https://icons8.com
Screenshots:
Category:
Keywords:
Application versions:
Changelog:
fix strava upload when access token needs refresh
Comments
SKD
Wed, 2022/03/30 - 10:54
Permalink
My current sailfish version is 4.3.0.15. I just tried starting from terminal, here's the output (the 2 lines actually loop for quite some time at the "..."):
[nemo@XperiaXA2 ~]$ harbour-kuri
[W] unknown:0 - GStreamer; Unable to pause - "file:///home/nemoaudio/hr_toohigh_de_male.wav"
[W] unknown:0 - O2::refresh: No refresh token
[W] unknown:0 - O2::onRefreshError: QNetworkReply::NetworkError(AuthenticationRequiredError)
[W] unknown:0 - O2::refresh: No refresh token
[W] unknown:0 - O2::onRefreshError: QNetworkReply::NetworkError(AuthenticationRequiredError)
[W] unknown:0 - O2::refresh: No refresh token
...
[W] unknown:0 - O2::onRefreshError: QNetworkReply::NetworkError(AuthenticationRequiredError)
Segmentation fault (core dumped)
[nemo@XperiaXA2 ~]$
Does this tell you anything? :)
elBoberido
Wed, 2022/03/30 - 11:50
Permalink
The good news is that kuri 0.5 will use Amber Web Authorization instead of O2, which should fix this. The bad news is that I don't know when it's ready.
I'll have a closer look at this later.
Do you use strava with Laufhelden? If yes, could you log out before starting kuri?
Did you try to rename `~/.config/harbour-kuri/harbour-kuri.conf`? Please don't delete it. If it fixes the problem it will help to fix the bug.
SKD
Wed, 2022/03/30 - 14:46
Permalink
Thank you for looking into it! I tried disabling strava in Laufhelden --> no effect. I tried to rename ~/Laufhelden --> no effect.
But the thing with the config actually worked and Kuri did start up :). This is the content of the config file:
[recordsettings]
thresholds="Schwellwerte Aus,true,false,0,false,0,false,0,false,0|Wettkampf 10km,false,true,183,false,133,true,5,true,4.5|Training GA 1,false,true,141,true,130,false,6.2,false,3.2"
workoutType=biking
elBoberido
Wed, 2022/03/30 - 22:39
Permalink
Was that the only content?
Unfortunately I cannot reproduce the issue but I'm already on 4.4.
Glad it works for you now
silta
Fri, 2022/03/18 - 16:48
Permalink
Hi @elBoberido,
unfortunately Kuri doesn't work under SFOS 4.4.0.58 EA. Maybe because of the Sailjail limitations.
It would be nice if you could provide an update.
Thanks in advance.
elBoberido
Fri, 2022/03/18 - 22:23
Permalink
Will publish an quick fix soon. If you have similar problems with other apps, you can disable the sandboxing by editing the destop file under /usr/share/applications and add
silta
Sun, 2022/03/20 - 14:17
Permalink
Thank you for the update. Kuri is working now.
Have a nice day.
nas
Fri, 2021/11/12 - 19:34
Permalink
Hi @elBoberido ,
Do you know if Garmin HRM-Pro (https://www.garmin.com/en-US/p/682155) which has bluetooth can work with Kuri?
Thanks
elBoberido
Sat, 2021/11/13 - 18:57
Permalink
Sorry, I can't tell you if that device works. Maybe you can ask in https://forum.sailfish.org whether someone uses that device
Alex
Fri, 2021/11/05 - 21:02
Permalink
Hey @elBoberido,
upgrading SailfishOS to 4.3.0.xx will remove Kuri because it has a dependency to a mapboxgl-qml version that requires OpenSSL 1.0. Could you please provide an updated version of Kuri (that uses the latest version of mapboxgl-qml)? :)
elBoberido
Fri, 2021/11/05 - 23:35
Permalink
That's weird. I also updated to the 4.3 EA release but did not have the problem you described. Do you have the latest mapboxgl-qml installed? It is not directly provided by Kuri but must be installed and updated manually from rinigus repo.
Alex
Sat, 2021/11/06 - 17:38
Permalink
Well I was able to install Kuri again after updating mapboxgl-qml, thanks. :)
lxmx
Tue, 2021/07/13 - 03:46
Permalink
Getting a "Could not load the page" message when trying to start a workout on an Xperia X.
elBoberido
Tue, 2021/07/13 - 21:43
Permalink
I guess this is due to a missing mapboxgl-qml dependency. Can you try to install it manually?
Juanro49
Mon, 2021/06/21 - 23:45
Permalink
It's work fine, but I can't login to strava
elBoberido
Wed, 2021/06/23 - 00:02
Permalink
What error do you get?
pasik2
Thu, 2021/05/13 - 17:36
Permalink
Can you add 64 bit support for Sony Xperia 10 II? Thanks!
elBoberido
Sat, 2021/05/22 - 00:04
Permalink
Done. Please report if there are issues.
inte
Thu, 2021/02/25 - 13:22
Permalink
It is now always crashing when trying to start. I used it some time ago and connected to strava i think. Thats all... I could try after deleting my data if that helps?
elBoberido
Sat, 2021/05/22 - 00:10
Permalink
Sorry for not replying, was hit by real life. If you still have the data, please don't delete it but just move them to a different location. It might help debugging if it's related to the data.
amaretzek
Mon, 2021/04/19 - 01:23
Permalink
On my X, SFOS3, it crashed on startup after some "uptime". In this situation I have rebooted the phone. Didn't investigate, has a taste of "out of memory"...
elBoberido
Sat, 2021/05/22 - 00:12
Permalink
I also noticed that it's getting really slow after a few hours recording. I guess I have to refactor the recording a little bit.
SKD
Thu, 2021/03/25 - 15:37
Permalink
I unfortunately have the same problem since I started using my XA2 (sometime last summer). Whenever I try to start the app the icon appears for some time and then it's just gone.
elBoberido
Sat, 2021/05/22 - 00:07
Permalink
I also had this from time to time. It's running in the background and you can kill it with e.g. Lighthouse.
Recently I found how to reproduce it, so I hope to fix it soon.
inte
Wed, 2021/02/24 - 10:35
Permalink
I get a segfault error on sfos4 while Laufhelden still works.
Don't know if its your modifications or the strava account I added...
D] unknown:0 - O0BaseAuth::setLinked: false[D] unknown:0 - O0BaseAuth::linked: Yes
[D] unknown:0 - O2::refresh: Token: ... ""
[W] unknown:0 - O2::refresh: No refresh token
[W] unknown:0 - O2::onRefreshError: QNetworkReply::NetworkError(AuthenticationRequiredError)
[D] unknown:0 - O2::unlink
[D] unknown:0 - O0BaseAuth::setLinked: false
[D] unknown:0 - O0BaseAuth::linked: Yes
Speicherzugriffsfehler (core dumped)
elBoberido
Thu, 2021/02/25 - 01:41
Permalink
Do you have more information, like what you did before the crash? Is it reproducible?
DrYak
Mon, 2020/10/19 - 11:45
Permalink
Hello! Thanks for picking up the relay baton with this sports tracker.
I have troubles adding my BLE (random address type) HRM device to Kuri:
elBoberido
Sat, 2021/07/03 - 00:19
Permalink
Can you still reproduce this with v0.4.0?
elBoberido
Mon, 2020/10/19 - 22:55
Permalink
I'm currently not able to fix the Bluetooth issues by myself, since I don't have an appropriate device. I will happily accecpt any patch for the issue, though. Sorry that I cannot do more at the moment.
nemishkor
Tue, 2020/08/11 - 22:31
Permalink
Looks like connection to pebble works
Pages