Pure Maps
Pure Maps is a full-featured map and navigation application allowing you to explore maps, search for addresses and points of interest, as well as assist with navigation. For that, it uses online or offline service providers.
Offline maps, search and routing is possible with OSM Scout Server. Pure Maps will list OSM Scout Server among the providers if you have it installed. For it work, you'll also need to have the server running and map data on your device. See the OSM Scout Server documentation for installation instructions and follow setup instructions for Poor Maps.
Note: Online maps users are requested to register their own Mapbox GL key and enter it through the preferences of the application. This will allow us to use default key for application testing and provide the service without hitting free tier limits. Reasoning behind the requst is explained at TMO post, see follow up messages on TMO pages for users feedback and small details on how to enable and test the personal key. Note that without significant number of users moving to the personal keys, Mapbox key will be revoked and the users of Mapbox tiles will not be able to access it.
As of 23 Jan 2019, the public Mapbox access key has been revoked. Users are welcome to register their private key in the application.
Requirements:
- Mapbox GL Native QML component for map display and interaction, should be installed as a dependency automatically.
- Voice navigation requires that you manually install a text-to-speech (TTS) engine – Mimic, Flite, PicoTTS and Espeak are supported. Their quality is about in that order, with Mimic and PicoTTS available from this repository. See corresponding TTS engines for language covereage.
Pure Maps is a fork of WhoGo Maps and continues its legacy. Reasons for forking described at corresponding post.
License: GPLv3
Source code: https://github.com/rinigus/pure-maps
Translations: https://www.transifex.com/rinigus/pure-maps
Official TMO thread: https://talk.maemo.org/showthread.php?p=1547484
Donations: https://rinigus.github.io/donate
Screenshots:
Category:
Keywords:
Application versions:
Changelog:
Comments
piwei
Sun, 2020/02/23 - 14:32
Permalink
Pure Maps is great from what I had seen so far, many thanks!
Two questions:
rinigus
Sun, 2020/02/23 - 14:55
Permalink
Re font size: maybe you should try to make SFOS fonts huge for that time? Otherwise, its possible to find a place in QML and change it. Currently, its not made configurable in the program, but I do see your point.
Re maps: it looks like either OSM Scout Server is not running and Pure Maps is using cache or region is not downloaded. To check it out, try to press and hold some location. Or perform search, that's even better. If there are no results to some obvious location, you probably don't have OSM Scout Server running. Have you enabled autostart?
piwei
Mon, 2020/02/24 - 12:02
Permalink
Setting text size to "Huge" in the display configuration helps a little, but does not increase the font as much as I'd like.
Searching works, and I can see in the OSM Scout Server (which I always start manually before Pure Maps) that the queries appear there. But it actually does not find anything in the "empty" area. Searching for "Warnemünde" in my case just turns up streets called like that but not the actual city that is where the map is empty.
rinigus
Mon, 2020/02/24 - 12:13
Permalink
Re fonts: then you will have to experiment by increasing https://github.com/rinigus/pure-maps/blob/master/qml/NavigationCurrentBl... (easiest is to multiply by some factor)
Re server: then I suspect that the particular region has not been downloaded. Check whether you did so. If you think that the region should be there with your downloads, please let me know what's the specific region of interest and the corresponding search string.
piwei
Tue, 2020/02/25 - 10:13
Permalink
Yes, the region was downloaded and osm-scout-server didn't see any updates. So I started anew, removed the Maps.OSM directory and downloaded all 10 GB of maps again. Now the map displays as it should. :-)
I found that file in /usr/share/harbour-pure-maps/qml/ and edited as suggested. I tested several factors (* 2 to *4 and just giving it a value of 30), but the display is unchanged after restarting pure-maps. Do I need to remove some cache?
rinigus
Tue, 2020/02/25 - 18:29
Permalink
There should be no cache to remove, as far as I know. You are interested in increase of displayed speed, right? Hard to tell what you do - over here it works as expected.
piwei
Wed, 2020/02/26 - 00:30
Permalink
Hmm, I fiddled around with the pixelSize properties in several files and found that
--- Meters.qml 2020-02-25 20:26:23.127996487 +0100 +++ Meters.qml 2020-02-25 21:30:00.263996954 +0100 @@ -52,7 +52,7 @@ color: styler.fg font.bold: true font.family: "sans-serif" - font.pixelSize: styler.themeFontSizeOnMap * 2 + font.pixelSize: styler.themeFontSizeOnMap horizontalAlignment: Text.AlignRight lineHeight: 1.25 } @@ -64,7 +64,7 @@ color: styler.fg font.bold: true font.family: "sans-serif" - font.pixelSize: styler.themeFontSizeOnMap * 2 + font.pixelSize: styler.themeFontSizeOnMap horizontalAlignment: Text.AlignLeft lineHeight: 1.25 text: "\n"finally changed the display the way I wanted. (Well, now the speed is maybe too big, but I'll have to test in practise.) Many thanks for the pointers! :-)
rinigus
Wed, 2020/02/26 - 00:43
Permalink
Ahhhh, you were not navigating. There is a way better solution. Start navigation in "Follow me" mode. For that, go to the main menu, select navigate and get to the follow me by using pulley menu. Hit start on the window that's shown and you should have your speed, street on which you are and the correct mode.
Kabouik
Sat, 2020/02/22 - 16:04
Permalink
When installed on my Jolla C in 3.2.1.20 from Storeman, Pure Maps starts but does not show any map or UI. I tried installing with zypper but it seems there is a missing dependency:
[root@Sailfish nemo]# zypper in harbour-pure-maps
Loading repository data...
Reading installed packages...
Resolving package dependencies...
Problem: harbour-pure-maps-1.26.1-1.noarch requires mapboxgl-qml >= 1.5.0.2, bu
t this requirement cannot be provided
not installable providers: mapboxgl-qml-1.5.0.3-1.51.1.jolla.armv7hl[openrepo
s-rinigus]
Solution 1: do not install harbour-pure-maps-1.26.1-1.noarch
Solution 2: break harbour-pure-maps-1.26.1-1.noarch by ignoring some of its de
pendencies
Choose from above solutions by number or cancel [1/2/c] (c):
rinigus
Sat, 2020/02/22 - 16:08
Permalink
Please see description of the package. You may need to do "pkcon refresh" to make https://openrepos.net/content/rinigus/mapbox-gl-native-bindings-qt-qml discoverable. If provided Mapbox GL QML plugin is not installable (for example if you have old SFOS installed), checkout packages available at https://build.merproject.org/project/show/home:rinigus:maps
Kabouik
Sat, 2020/02/22 - 19:45
Permalink
I read it but the ouput above was already after pkcon refresh, and 3.2.1.20 is the latest SFOS version I think. I'll manually install the packages using your link, thanks!
[Edit] Actually, using pkcon instead of zypper worked. I was used to both being equivalent. Sorry for the noise!
griebjoe
Fri, 2020/01/17 - 12:15
Permalink
Great App, many thanks!
Is there a sound-only option? I would like to turn the display off without stopping the app.
ozamyatin
Mon, 2020/01/06 - 21:24
Permalink
Very nice app, thanks
rossholmes
Fri, 2020/01/03 - 01:30
Permalink
Never had a better free navigator on any of my device
Your work is greatly appreciated!
Bramba
Sun, 2019/12/29 - 12:30
Permalink
This app is still one of the very best pieces of software that Sailfish has ever seen! :-) Thank you very much!
Two questions:
1.) What does profile "mixed" do in detail? Sure, "online" and "offline" is making sense, but what is "mixed"? Does the mixed profile take building data from online maps while using the offline map as a base layer?
2.) Could you add an option to create a backup of the favorite places/bookmarks/points of interest? I fear that I would loose them when reinstalling Sailfish to new devices.
rinigus
Sun, 2019/12/29 - 21:02
Permalink
Thanks!
1: yes, the mixed profile aloows you to combine online/offline services as you please. such as choose what is used for map tiles, search, and routing regardless on classification of the services.
2: if you back up .config folder, you will backup all settings for Pure Maps, including POIs. Will have to figure out still how to sync between devices. Should be possible with Nextcloud/Maps
Kabouik
Sat, 2019/10/19 - 11:26
Permalink
I am trying to install Pure Maps on a Jolla C freshly factory reset and upgraded to the latest SFOS version, but the installation fails without any error message. In Storeman, after adding you repository, installation attempts just result in "Unknown" instead of "Installed" or "Not installed" where Storeman normally shows the status of the application. In terminal, with "apk install-local" on the file manually downloaded from openrepos (latest version), there is just no output at all. Any ideas? OSM Scout installed correctly, so the repo works.
rinigus
Sat, 2019/10/19 - 11:34
Permalink
try pkcon refresh in terminal and then try to install again
Kobieknight
Tue, 2019/10/15 - 01:50
Permalink
Despite me indicating that I would like to avoid tolls, I'm still receiving directions to proceed through tollways (Xperia X 3.1.0.11, US Chicago-Midwest)
rinigus
Tue, 2019/10/15 - 08:41
Permalink
Please specify which provider are you using. If it is OSM Scout Server, latest version, I will need specific example of your settings and route. Note that we will probably need example publicly later, so find the example that is OK for you to be disclosed in terms of privacy.
Kobieknight
Mon, 2019/11/11 - 02:28
Permalink
It doesn't matter which map I use (Mapbox, Here, or OSM) there are times despite selecting avoid, when I set the navigation, it tries to direct me through toll roads. I'll try to send you an example.
Pohli
Sat, 2019/12/14 - 16:22
Permalink
Switching maps should have no effect, try different routing engines instead. From main menu go to Navigation and then check the pulley menu.
matveich
Thu, 2019/10/03 - 22:31
Permalink
Search is not working with OSM server. It either returns no result or application stops working and restarts. Any idea what can be the problem?
Pure map version: 1.25.2
OSM scout server version: 1.15.0-1.119.1
rinigus
Thu, 2019/10/03 - 22:53
Permalink
Sounds like out-of-memory killer. Have you restricted number of languages parsed by the server when you request the address? How much RAM do you have on your device?
matveich
Thu, 2019/10/03 - 23:46
Permalink
Only one language(en). Available RAM: ~800mb(Jolla).
From what I can tell the problem is with libpostal, used by OSM server. The search works fine without it, but not for postcodes. Not sure if the problem is with search engine or maps.
Btw, is it possible to route along specific waypoints? Or drag created existing waypoints?
rinigus
Fri, 2019/10/04 - 09:29
Permalink
libpostal does use RAM for address processing. to use without it, please see Geocoders section in https://rinigus.github.io/osmscout-server/en/
dfstorm
Tue, 2019/09/17 - 22:11
Permalink
This app is geeting better and better. Good job.
glanternier
Sat, 2019/09/14 - 15:20
Permalink
Wow! So fast :-) Thanks!
glanternier
Sat, 2019/09/14 - 12:41
Permalink
Hello, after upgrade to 1.25.0-1 the search isn't returning any results anymore.
rinigus
Sat, 2019/09/14 - 13:21
Permalink
Bugfix version released
Pages