Ti85emu
Ti85 emulator. You will need a rom file, it is not included.
After starting the application you need to switch the calculator on with the ON button. There is also a auto time off. After some time when there is no input it looks like that the calculator is stuck but it is sleeping wake it up by press the on button.
With the save/load buttons you can save the calculator status and load it. The reset button will reset the calculator and settings.
Since 0.0.9-10 the emulator has a settings file so you could have your rom file where you like, the file must have a ".rom" extension. Start ti85emu click the menu button, click on settings and then select file, select your rom file and click open. Finally you need to click on ok and close afterwards the application and restart.
Also the load function (*.sna;*.sav) and send function (*.85p) has now a file dialog.
Rom file location:
In most countries, it is illegal to share or download ROM images for devices you do not own. Dump your rom, rename and copy to (not needed anymore) you can select your rom from any location:
/home/nemo/.ti85emu/ti85.rom
Load vti save file:
Rename and copy the vti save file to /home/nemo/.ti85emu/ti85emu.sna and then push the load button. You can load the file from different locations through the menu.
Sending program files to the emu:
You can send *.ti85p files to the calculator, it works only with single program file.
- Rename *.ti85p to dummy.send and copy to /home/nemo/.ti85emu/
- In the calculator push 2nd -> LINK -> F2 (RECV) then push the send button above the display.
- The transmission of the file should be quick. Now you can push the on button to end the transmission.
Error 35 will pop up but the program should be there.
If you love the app and would like to donate through paypal, you can follow the link.
Screenshots:
Category:
Keywords:
Application versions:
| Attachment | Size | Date |
|---|---|---|
 ti85emu-0.0.9-3.armv7hl.rpm | 60.68 KB | 05/03/2016 - 00:27 |
| ti85emu-0.0.9-4.armv7hl.rpm | 60.51 KB | 16/03/2016 - 20:06 |
| ti85emu-0.0.9-5.armv7hl.rpm | 63.38 KB | 24/09/2016 - 23:02 |
| ti85emu-0.0.9-6.armv7hl.rpm | 126.92 KB | 28/10/2017 - 21:46 |
| ti85emu-0.0.9-7.armv7hl.rpm | 129.47 KB | 30/10/2017 - 01:08 |
| ti85emu-0.0.9-8.armv7hl.rpm | 131.18 KB | 19/05/2019 - 03:57 |
| ti85emu-0.0.9-9.armv7hl.rpm | 130.54 KB | 20/07/2019 - 01:26 |
| ti85emu-0.0.9-9.i486.rpm | 132.93 KB | 20/07/2019 - 01:26 |
| ti85emu-0.0.9-10.armv7hl.rpm | 149.79 KB | 04/01/2020 - 01:20 |
| ti85emu-0.0.9-10.i486.rpm | 155.42 KB | 04/01/2020 - 01:20 |
| ti85emu-0.0.9-11.armv7hl.rpm | 149.67 KB | 18/01/2020 - 04:44 |
| ti85emu-0.0.9-11.i486.rpm | 155.41 KB | 18/01/2020 - 04:44 |
| ti85emu-0.0.9-12.armv7hl.rpm | 148.76 KB | 19/01/2020 - 22:52 |
| ti85emu-0.0.9-12.i486.rpm | 154.29 KB | 19/01/2020 - 22:52 |
| ti85emu-0.0.9-13.armv7hl.rpm | 151.06 KB | 11/06/2021 - 02:39 |
| ti85emu-0.0.9-13.i486.rpm | 158.59 KB | 11/06/2021 - 02:39 |
| ti85emu-0.0.9-13.aarch64.rpm | 148.74 KB | 11/06/2021 - 02:39 |
| ti85emu-0.0.9-15.armv7hl.rpm | 174.6 KB | 10/12/2021 - 20:54 |
| ti85emu-0.0.9-15.i486.rpm | 181.9 KB | 10/12/2021 - 20:54 |
| ti85emu-0.0.9-15.aarch64.rpm | 172.85 KB | 10/12/2021 - 20:54 |
Changelog:
* Fri Dec 10 2021 Halftux 0.0.9-15
- changed desktop file
- added icons
- compiled with 4.3.0.12 environment
* Sun Oct 03 2021 Halftux 0.0.9-14
- fixed menu size
- changed config location
- compiled with 4.1.0.24 environment
* Fri Jun 11 2021 Halftux 0.0.9-13
- fixed user nemo problem
- compiled with 4.0.1.48 environment
* Sun Jan 19 2020 Halftux 0.0.9-12
- fixed error msg placement
* Fri Jan 17 2020 Halftux 0.0.9-11
- fixed rom file dialog parent
- fixed start script for XA2 plus
* Fri Jan 03 2020 Halftux 0.0.9-10
- fixed desktop file
- fixed start script
- added file dialog for load/send and for rom selection
- added settings and ini file
- added auto load save function
- compiled with 3.2.1.20 environment
* Fri Jul 19 2019 Halftux 0.0.9-9
- fixed center support with or without scaling
- fixed startscript for high resolution support
* Sun May 19 2019 Halftux 0.0.9-8
- start script for 1920x1080 resolution
- added screensize detection
* Sun Oct 29 2017 Halftux 0.0.9-7
- removed button scaling for 1920x1080 resolution
- added save/load message
- added high DPI hint
* Sat Oct 28 2017 Halftux 0.0.9-6
- no icons workaround and quality upgrade
* Sat Sep 24 2016 Halftux 0.0.9-5
- save bug removed
- center support
- Jolla C support
* Tue Mar 8 2016 Halftux 0.0.9-4
- load vti save file support
- fixed signal double connections
* Fri Mar 4 2016 Halftux 0.0.9-3
- Set no interactions err textedit
* Sun Jan 31 2016 Halftux 0.0.9-2
- Initial release optimized for SF
* Sun Jan 31 2016 Halftux 0.0.9-1
- Initial release
Comments
levone1
Sat, 2021/12/11 - 06:10
Permalink
Still the same for me - go to settings, "select file", go to file and tap on it, and the file highlights, but tapping "open" does nothing...
Error is
[D] unknown:0 - QModelIndex(3,0,0x62a3cf2960,QFileSystemModel(0x62a3c4ed60)) ,
[D] unknown:0 - ""
/usr/share/ti85emu/ti85emu.sh
halftux
Sat, 2021/12/11 - 11:10
Permalink
I am sorry to hear. This is not really an error it is a debug output. It shows that the selected file gives an empty string back. I really have no clue it is working with the emulator and with Jolla C. But I saw also in the past that the emulator behaves different. The only chance is to make manual an ini file. In your user home folder ~/.config/ti85emu/settings.ini
With this content, you need to tune the path for your rom file:
[%General]
autols=false
bgcolor=4278190080
fgcolor=4279798040
romFile=/home/nemo/Documents/ti85.rom
levone1
Sun, 2021/12/12 - 01:33
Permalink
Works fine that way, thanks.
itsNotMe
Fri, 2021/12/10 - 16:37
Permalink
Tried to install the application on =S 4.3.0.12 on a XA2+ .
1) Installation finished with success message.
2) Tapping on the TI85Emu Symbol tries to start the app, but crashes after a few seconds.
3) Starting the app via terminal opens the app, but it is not zoomed/uses only half of the screen. It is impossible to load a rom - it's not selectable. Tapping "save" crashes the app. errormessages :
Segmentation fault (core dumped)
4) Starting the app via the terminal tapping first "load", second "reset" crashes too. error messages:
[D] unknown:0 - Using Wayland-EGL
vti pass 'ti85emu'
vti fail!
Segmentation fault (core dumped)
halftux
Fri, 2021/12/10 - 20:59
Permalink
Uploaded a new version, try again please. Go first to the menu, settings and select your rom file.
itsNotMe
Wed, 2021/12/15 - 21:20
Permalink
Sorry for the delay. Zoom is working now. And the workaround editing the settings.ini for the correct rom file too.
levone1
Fri, 2021/11/05 - 21:11
Permalink
Also not working for me to load rom file. Error is:
[D] unknown:0 - QModelIndex(3,0,0x5c7ab5(after tapping "open" a couple of times).fff0,QFileSystemModel(0x5c7aaa2280)) ,
[D] unknown:0 - ""
[D] unknown:0 - QModelIndex(3,0,0x5c7ab5
fff0,QFileSystemModel(0x5c7aaa2280)) ,
[D] unknown:0 - ""
[D] unknown:0 - QModelIndex(3,0,0x5c7ab5
fff0,QFileSystemModel(0x5c7aaa2280)) ,
[D] unknown:0 - ""
zipotron
Sat, 2021/10/09 - 15:39
Permalink
Hi again halftux! I write you because from I canged my phone to the X10II I couldnt make your app works anymore. I try to load a rom but the file explorer dont allow me to select the .rom, shows it but is not selectable... are you aware of that?
halftux
Mon, 2021/10/11 - 14:55
Permalink
Are you trying to load the rom through the settings? Menu, settings, select file. If not which sailfish version do you have?
zipotron
Sat, 2021/10/16 - 12:10
Permalink
Yes, through setting. I use the last 4.2 sailfish.
halftux
Sat, 2021/10/30 - 22:39
Permalink
With the latest offical release 4.2.0.21 it runs fine without any problems. At least at my Jolla C.
zipotron
Wed, 2021/06/09 - 15:22
Permalink
Hello Halftux! First, thanks for this amazing app, I was using a lot in my old Xperia X. I would like to ask a aacrch64 version, now I have the Xperia 10 II and really miss your app!
halftux
Fri, 2021/06/11 - 02:40
Permalink
Nice that you like the app. I compiled it for aarch64 now.
MartiMasa
Sun, 2019/12/29 - 21:52
Permalink
@halftux there needs to be still some adaptation reagrding screen resolution to use the app in full screen. So far it only works well only on the mighty old Jolla JP1...all newer devices show the calculator only in a minimized few that is not so practical.
Here is a link to the ROM file which is needed to use this app - please test:
The ti85.rom file which should be in the .ti85emu folder in nemo:
https://drive.google.com/open?id=1Nr54F-OCvYBg6_7nW_fooZHev4yJMdHY
Happy new year to all of you guys!
zuyev
Fri, 2020/01/17 - 18:22
Permalink
I have XA2 Plus. I can't see the menu button. I can't load /home/nemo/.ti85emu/ti85.rom.
Thank you for your work!
MartiMasa
Sun, 2020/01/19 - 15:37
Permalink
Same problem on my XA2 Plus! The menu bar is not shown unlike on XA2 Ultra (app works brilliantly now and this is the device I mainly use), Jolla 1, Jolla tablet, Xperia X which I've tested. It seems that only for XA2 Plus the screen-resolution is not quite correct. Otherwise the app has greatly improved!!!
halftux
Sat, 2020/01/18 - 04:53
Permalink
I uploaded a new version please test.
MartiMasa
Sun, 2020/01/19 - 15:45
Permalink
Thank you very much! The new menu with loading ROMs is great and improves the overall usability a lot. BTW, there's an app that is similar which is called „Graph 89” in F-Droid but I didn't manage to get any ROM to work. However, I think your native app is much better! Viele Grüße!
zuyev
Sat, 2020/01/18 - 11:19
Permalink
Thank you!
I still can't load the rom.
https://1drv.ms/u/s!Aj0YJYt7rF_ehtwCYS14EQbweyvpmw?e=kjdH3Z
halftux
Sun, 2020/01/19 - 22:53
Permalink
Thank you for the screenshot this helps a lot to solve the problem.
Should be fixed now! Please test.
MartiMasa
Mon, 2020/01/20 - 00:05
Permalink
Thank you for fixing the XA2 Plus issue!
zuyev
Mon, 2020/01/20 - 00:18
Permalink
Thank you! Working.
MartiMasa
Mon, 2020/01/20 - 00:05
Permalink
On my XA2 Plus it works now with the ROM file I provided with the link earlier! Please try loading the ROM file under Menu > Settings > Select File. After selecting you should close and restart the app.
halftux
Mon, 2020/01/20 - 15:30
Permalink
@ MartiMasa & zuyev thank you for reporting the issues and for the confirmation that it is working now.
halftux
Sat, 2020/01/04 - 01:24
Permalink
Should be fixed now there was an old startscript in the package. And thank you for your support added more functions for you.
MartiMasa
Wed, 2019/07/17 - 19:49
Permalink
&halftux thanks for finding time to update your app! I tested it on a few SailfishOS devices and it works now fine except on Xperia XA2 Plus. However this phone is a popular one...with 1080 x 2160 pixels (18:9 ratio). Would you be able to adapt your script to take XA2+ into account in next update. Also, if you could deploy it for x486 as well, it would be awesome to get it working for Jolla Tablet!?
halftux
Fri, 2019/07/19 - 13:05
Permalink
I will include 1080x2160 resolution for the next release. Are there more popular devices for x486 tablets with different resolution or only the jolla one 1536 x 2048 pixels, 4:3 ratio?
halftux
Sat, 2019/07/20 - 01:28
Permalink
Ok I think I fixed the resolution and center problems. I also released a x486 version. A feedback would be welcome.
MartiMasa
Mon, 2019/04/22 - 22:46
Permalink
Do you still have time to develop this app further? I like this app a lot, it looks great on Jolla JP1 and C but on high resolution Sony Xperia XA2/XA2+ it looks odd with font outside the calculator picture. Would there be a chance to scale/zoom the TI84 picture for Sony Xperia devices? I'd like to donate!
halftux
Sun, 2019/05/19 - 03:58
Permalink
Try the last version please and report if it is working.
Pages