Bleeding edge sd-utils

@V10lator I'd to fork from the latest version (0.3.0.1-2) of your mount-sd.sh script, bit I cannot find on github. It's not at https://github.com/V10lator/bleeding-sd-utils/releases. Can you help me find it ?

olf

Wed, 2019/11/06 - 02:38

It is inside the archive files there, take a look in @V10lator's sd-utils source code repository.

But all the various forks of and patches to the sd-utils were derived from MER's / Jolla's original sd-utils, which were obsoleted and not used anymore since SailfishOS 2.2.0 and ultimately removed in SailfishOS 3.2.0. Consequently its source code repository was archived by moving it into mer-core-attic.
Hence the mechanisms employed by all sd-utils variations are not supported anymore.

SebMa

Wed, 2019/11/06 - 03:12

@olf The latest release in archive files there is 0.0.18 not 0.3.0.1-2

olf

Sat, 2019/11/09 - 18:52

The repo is newer (who cares about some old, tagged archive files), but (as said) follows an (now) obsolete approach anyway.
P.S.: May I suggest to support TJC #212628 and to use FAT (as vFAT32) or EXT4 meanwhile.

SebMa

Thu, 2019/11/07 - 17:41

What repo are you talking about : the V10lator on github or the V10lator on openrepos ?

rfa

Sat, 2017/10/21 - 09:21

I'm trying to follow these instruinstructions :

download warehouse
find bleeding edge sd utils
install
uninstall
reinstall

& then my sd permission should work. I think I missed something, my sd appears, but no permission to access /media/sdcard... is still returned

Mon, 2016/06/20 - 19:26

after update, it wont work again

Tue, 2016/06/21 - 00:45

Point 2 of the FAQ:
My card won't mount anymore after a update of SailfishOS, what to do?
Reinstall bleeding edge sd-utils (see comment #9665 for more information).

Tue, 2016/06/21 - 00:56

of course I know, bit still same
Reinstall previous version fixed

Tue, 2016/06/21 - 00:59

Wait, are you talking about an update of SFOS or this package here?

Tue, 2016/06/21 - 01:09

this package here

Tue, 2016/06/21 - 02:31

That's strange and it I can't reproduce it.
Is there any output if you execute
/usr/sbin/mount-sd.sh add /dev/mmcblk1p1
(change /dev/mmcblk1p1 if needed: /dev/mmcblk is your SD card, p1 is the first partition) with the newest version of this script? Also do you have the file /etc/sailfish-release on your device and does it contain the line
VERSION_ID=2.0.2.45
?

Tue, 2016/06/21 - 02:47

1. Nothing show in first command
2. I got this line

Sat, 2016/06/18 - 01:35

It seem it cant mount my exfat sdcard now in 2.0.2
uninstall and reinstall nil help, it said unknown filesystem

Sat, 2016/06/18 - 10:40

My Jolla 1 is still on 2.0.1.11, how did you get access to 2.0.2 (do you own a Jolla C) ?

So as our OS versions differ the following is just guessed:
Most likely this package is working as it should but you also need exfat-nofuse and exfat-utils installed. If that doesn't fix your issue exfat-nofuse might need a update. You could check that by enabling developer mode on your SailfishOS device and executing
uname -r
it should show 3.4.108.20150901.1. If it shows a higher number either contact me to give me the new number and test a pre-release for me or wait till 2.0.2 is available to early access users so I can test for myself.

//EDIT: If you try to mount exfat manually please try to add
-t exfat
to your mount command.

Sat, 2016/06/18 - 11:29

If I manually mount , it said filesystem not support
Mine is 3.4.108.20160401.1
I update to 2.0.2.45 by using ssu re 2.0.2.45 , version --dup

I have tried install exfat fuse , it works only after I create its filesystem
after reboot, it wont mount again, I have labelled it

Sat, 2016/06/18 - 11:46

Thanks, investigating.

Sat, 2016/06/18 - 11:55

Find me if u want me to test new version

Sat, 2016/06/18 - 19:14

Fixed. Please update exfat-nofuse to 1.2.11.

Skillmon

Sat, 2016/05/21 - 22:42

Installation failed for me (from within Wareshouse) due to:
Status: dep-resolution-failed Extra details: There is no update candidate for sd-utils-0.1.0-1.13.1.noarch

Sun, 2016/05/22 - 09:25

You might have noticed that it showed as installed while it wasn't (0.1.0-1.13.1 is the version Jolla uses, 0.3-1 is the newest upstream ( https://git.merproject.org/mer-core/sd-utils/blob/master/rpm/sdcard-util... ) and 0.3.0.1-1 is the newest bleeding edge you want to install, see also https://openrepos.net/comment/10064#comment-10064 ). So I guess you tried to "update" which won't always work. To correctly install it you have to uninstall first, then install.

Skillmon

Sun, 2016/05/22 - 09:51

Thank you for the fast reply. Now installation worked just fine!

eatdirt

Sun, 2016/05/08 - 23:20

If I may, are you the V10lator of Q3arena and QuakeLive?

sorry if you're not!

If you are, I guess we shared a few hundred of frags together :D

cheers.

Sun, 2016/05/22 - 09:12

No, that's not me, sorry.

Just for reference, that's me on Steam: http://steamcommunity.com/id/V10lator

MoritzJT

Fri, 2015/10/23 - 13:56

Does this need updating for SailfishOS 2.0.0.10?

Currently my f2fs partition won't mount, only my SWAP partition.

I have uninstalled the original utils and installed these instead but it won't mount my f2fs one.

Fri, 2015/10/23 - 14:27

This doesn't need updating, but f2fs does (read on the description: "Compiled for kernel 3.4.106.20150416.1 (SailfishOS 1.1.6.27 - 1.1.9.28)").

Sorry to say but at the time of writing I can't update f2fs to 2.0.0.10 (kernel 3.4.108.20150901.1) as Jolla didn't release the kernel sources yet.

//EDIT: Yes, that means I also can't access my SD card atm. :(

MoritzJT

Fri, 2015/10/23 - 16:17

Carsten (stskeeps on irc & elsewhere) offered to pull the kernel sources out if it is urgent, but he also said it might have to be done again then upon the final release. As I have no experience with this I didn't ask him to. Maybe you can be a better judge on the situation and get back to him on IRC

Thanks for the clarification though!

Sat, 2015/10/24 - 15:52

Updated f2fs. Have a nice day. :)

MoritzJT

Wed, 2016/07/20 - 23:34

Hey, do you know whether we f2fs needs an update for Jolla C on 2.0.2.45? I can't seem to mount my SD card :-(

uname -r shows:

3.10.49+0.0.52.2

Thu, 2016/07/21 - 10:55