Patch: Voice call combined patch

Rating: 
4.8
Your rating: None Average: 4.8 (5 votes)

Combination of different patches with settings page: 

Patch requires SailfishOS 1.1.9.28 (for patch version =< 0.0.5-1)

Patch requires SailfishOS >= 2.0.0.10 (for patch version >= 0.0.6-1)

Patch requires SailfishOS 2.0.1.11 (for patch version >= 0.0.9-1)

WARNING: patch conflicts with base patchesalternative better call log. Remove them before install this one.

TRANSIFEX TRANSLATE PROJECT

Currently contains these languages:

  • English (UK and US)
  • Russian
  • Swedish

Donations are welcome :)

Support

Screenshots: 
Changelog: 

hangup animation duration minimal value defined to 0 sec.
translations update

Comments

Ancelad's picture

Seems you've forgot to disable it before system update

danfin's picture

that could be true. Is there a fix, or do I need to reset my device? Sorry, fo course:

https://together.jolla.com/question/50986/howto-how-to-revert-to-an-earl...

Ancelad's picture

Seems you don't have patch which was applied correctly

danfin's picture

yes, and I have fun: Patchmanager will not uninstall it, so I can't even get rid of it. Msg 'removal failed'. Plus, I can use Call recording or Quick call, if I want.

Ancelad's picture

Check Settings - Apps - Phone

danfin's picture

thats exactly where I don't find 'additional settings'. Only the main page (call duration, call lo, call recording, sim1, sim2, voicemail number) is accessible, pulley to delete call duration too.

danfin's picture

thank you. I downgraded, restarted and upgraded to 0.04 from webcatalog. Additional settings are missing however.

Ancelad's picture

It works. Don't use warehouse-version, use the latest from Patchmanager2 web-catalog.

danfin's picture

is this patch functional in 2.1.1.24? On my intex, it does not work, and it does not uninstall from patchmanager nor from Warehouse. Warehouse will msg 'nothing provides voicecall-ui-jolla=0.10.1.1 combined-2.0.5.6-1.armv7hl'

Apanas's picture

After update to 2.1.1.23 and 24 can't apply patch. Failed to install patch.

Ancelad's picture

No any problems

danfin's picture

after installing via patchmanager, I can tap on 'phone settings' but this shows the app's info page and lets me unapply the patch only. Where a I supposed to find 'voicecall combined settings' settings? I don't find 'em. (intex aqua fish, 2.1.0.11)

Ancelad's picture

Settings - Apps - Phone

olf's picture

The intensity setting of the "vibrate when connected" function has a bug:
1. It is always reset to "1" when leaving / reentering Settings --> Apps --> Phone, after setting Additional settings --> Vibrate when connected --> Intensity to any value greater or equal than "0.5", there.
2. It is always reset to "0" when leaving / reentering Settings --> Apps --> Phone, after setting Additional settings --> Vibrate when connected --> Intensity to any value smaller than "0.5", there.
3. The setting "0" is not reachable by pulling the slider to its leftmost position, but by executing point 2.

Possible solutions:
a. Make the leftmost position of this slider always "0.1", and not "0" after executing point 2.
b. I do understand that various hardware has different properties WRT their vibrators. Apparently the Jolla 1 phone has only two settings (this statement may be technically incorrect, judging only from the behaviour here), "weak" (mapped to "0" to "0.4" in "Voicecall combined patch", currently) and "strong" (mapped to "0.5" to "1").
If it is possible to detect the number of vibration intensity levels of a specific hardware (or to detect the hardware in general and have a table in "Voicecall combined patch, listing this number for devices officially supported by SFOS), please only offer this number of slider positions. I.e. "0.5" and "1" for a Jolla 1 phone, if I understand all this correctly.

Side note: IMHO the sub-section "Additional settings" is not necessary or very helpful. These settings could be just as well part of the regular settings (i.e. one level higher, not in a *sub*-menu anymore; either above or still below the SIM card settings) for the Phone app, or am I missing something?

Tested with "Voicecall combined patch" v0.0.3 (from Patchmanager2's web catalog) under SailfishOS 2.1.0.11 on a Jolla 1 phone.

Ancelad's picture

Thanks, the value is correct now.

olf's picture

Wow, much more than this, the vibra slider is working perfectly in v0.0.4! :))
Side note: Updated German strings for "Voice call combined patch" on Transifex (rectified two typos and enhanced three other translated strings).

AA1AA's picture

I found the problem, everything works fine now !

AA1AA's picture

Hello,

Since I've updated my phone, when the patch is activated I have no keypad. What should I do ?

Ancelad's picture

What kind of keyboard?

AA1AA's picture

The phone call keyboard

Ancelad's picture

It doesn't affect on the keyboard, what phone patches do you use? Did you try to use pulley-menu in the call-ui?

DameCENO's picture

Hi Ancelad, have a lil problem with the patch. Had to reset my jolla due to my desire to mount my home and android partitions on my SDXC card which hasn't been successful. I now have a harrd time applying this patch, and this is my best patch, it installs but won't apply, its setting page works fine but can;t apply the patch. tried the last 3 versions, to no avail. I am on 2.0.0.10 any help would be awesome

Ancelad's picture

Run this command as root:

patch --dry-run -p 1 -d / -i /usr/share/patchmanager/patches/sailfishos-voicecall-combined/unified_diff.patch

and show output

alina's picture

Great update! Is it possible to have the phone label (mobile, personal, work)?

DameCENO's picture

Great addition Ancelad, I just noticed I have never donated to you specifically, my apologies for that, donation on the way, keep it up man

virgi's picture
Ancelad's picture

Yes, I can =)

gedeon's picture

I changed to the alternative, but now I will change back, cool! ;)

virgi's picture

Nice! Thanks!

PS default better call log patch has a bug: if number is not a contact, it will show number two times. It should show number only if contact name is displayed. It is fixed in my patch, so maybe you could fix that too?=)

Thanks again for a good patch

Ancelad's picture

No problem :) thanks for report and patch-code :)

Pages